Running on a Soekris 4801, it has always worked before ... i just noticed that it didn't work when i had the console cable connected ... usually I don't manage it that way except when I upgrade and have trouble.
-- David L. Strout Engineering Systems Plus, LLC ----- Original Message ----- Subject: Re: Re: [pfSense Support] newest imbessed image errors ... From: [EMAIL PROTECTED] To: support@pfsense.com Date: 03-26-2007 8:21 pm > On 3/26/07, David Strout <[EMAIL PROTECTED]> wrote: > > The errors are gone and I am able to assign > > interface params, but the halt option doesn't seem > > to work (seperate issue, maybe it hasn't been > > working on the embedded ver.) > > > Not seeing that here. Maybe it's hardware related. > > pfSense console setup > *********************** > 0) Logout (SSH only) > 1) Assign Interfaces > 2) Set LAN IP address > 3) Reset webConfigurator password > 4) Reset to factory defaults > 5) Reboot system > 6) Halt system > 7) Ping host > 8) Shell > 9) PFtop > 10) Filter Logs > 11) Restart webConfigurator > > Enter an option: 6 > > > pfSense will shutdown and halt system. This may take one minute. > > Do you want to proceed [y|n]? y > > pfSense will shutdown and halt system now. > > *** FINAL System shutdown message from [EMAIL PROTECTED] *** > System going down IMMEDIATELY > > > > pfSense is now shutting down ... > > Waiting (max 60 seconds) for system process `vnlru' to stop...done > Waiting (max 60 seconds) for system process `bufdaemon' to stop...done > Waiting (max 60 seconds) for system process `syncer' to stop... > Syncing disks, vnodes remaining...0 0 done > All buffers synced. > Uptime: 45m37s > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
