Joe, I read about your problem, and i guess it's a ROUTE/ RULE issue. (maybe some firewall rule issue) Use the packet monitor (Sniffer) and your PFSENSE LOG to find out what's hapenning. Be sure that the packets are reaching the Firewall Interface and where they are stopping. Remember to make the rules at your Firewall and enable the LOG. I guess you have a DESKTOP at the PPTP side, and the PFSENSE Firewall at another. No rules are needed at the Desktop side, but you need to garantee that you are permitting packets from the LAN are passing thru the VPN between the two parts... If you have 2 Firewalls, be sure to review your rules and routing. Enable LOG at both sides. It´s not a PFSENSE problem i guess... It's just a configuration issue... Good Luck! Regards. Fabrício Guzzy. |||| Fabrício Ferreira |||| Espec. T.I. e Segurança Digital. MCP* - Microsoft Certified Professional ConnectCom - São Paulo - Brasil Tel: (011) 5095-1234 Cel: (011) 9937-6605 E-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> O conteúdo deste documento está restrito ao interesse das partes e não devera ser divulgado,transcrito ou modificado sem a autorização do seu emitente. The content of this document is restricted to the interest of the parts and can not be divulged,transcript or modified without the authorization of the sender
-----Mensagem original----- De: Joe Vanderstelt [mailto:[EMAIL PROTECTED] Enviada em: quinta-feira, 31 de maio de 2007 09:31 Para: support@pfsense.com Assunto: [pfSense Support] ping PPTP cleint from lan. Hello, I have a problem with pptp Here is my setup: LAN: 10.0.0.1/8 PPTP-server: 192.168.55.1 PPTP-network:192.168.55.32 The problem is I have full access from VPN -> LAN but the other way LAN -> VPN client I get nothing. I have tried setting my PPTP-server address to 10.0.0.30 and PPTP-network to 10.0.0.32 (inside my LAN ip range) which did not work. Basically: After I connect a client via pptp I cannot ping the client from a computer inside the lan, but I have full access to the lan from the client. Thanks