On 6/30/07, William Smith <[EMAIL PROTECTED]> wrote:
Hi All, I am new to pfsense and have it working with 1 WAN perfectly. What I have done is set my ISP supplied router/modem to a bridged device and used PPPoE authentication from the WAN interface in Pfsense. My ISP assigns me a static IP based on my login so using DHCP client on the WAN is nice because I get my static ip, gateway and dns servers, very nice. Now I have 2 more DSL lines and after installing pfsense and getting round to the next WAN(OPT1 & OPT2) I've noticed there is no PPPoE setup available for these interfaces. Is there a trick I'm missing or is this not possible to have multiple PPPoE session. By the way if it matters my 3 DSL's are provided by the same ISP, all have different logins and passwords, and are assigned different static IP's based on the login name. Thanks for any advice or help in advance.
PPPOE is not supported on OPT interfaces currently. Terminate the PPPOE connections using a modem instead and pass back to pfSense. Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
