We don't support that type of setup. Nor would a bigger PC with more interfaces actually solve your problem. FWIW, FreeBSD itself doesn't really support what you want (although it might be possible to hack using ng_eiface).
--Bill On 7/13/07, Marc Eggenberger <[EMAIL PROTECTED]> wrote:
Hi everyone. I have a cable connection. I can get up to 4 IP addresses via DHCP on this line. I run pfSense on a WRAP with 3 Interfaces. One LAN, one for DMZ and one WAN. It works great. Now I have two webservers in the DMZ. I'd like to use port 80 with both of them. All howto's etc descript a similar setup with virtual ip's but as far as I see this only works with fixed IP addresses. I can only get them via DHCP. I do not want to select DHCP get an IP, change to fix with the ip I got and do this several times to get new ip's. Can I somehow create virtual interfaces which I then set to DHCP? The WRAP box has only 3 nics and I cannot expand. I don't want to use a big loud (compared to WRAP) pc with several nics. In Linux I can use something like eth0:0, eth0:1 etc for virtual interfaces which I can set independently from the main eth0 interface. I do not need load balance or similar as its the same cable connection anyways. Anyone knows a solution for my problem? Regards, Marc
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
