I'm having a problem with the installation of pfSense 1.2RC2
After booting with the live CD, immediately after assigning the network
interfaces, the software complains with the message 'Interface
Assignment Mismatch', and restarts the assignment procedure. I've tried
typing the names of the interfaces (I'm using only the two names the
installer gave me: rl0 and em0), inverting the interfaces (em0 as WAN
instead of LAN), and also using the auto-detect procedure, the result is
always the same.
One of the interfaces is on-board (em0), the other is an add-on (rl0).
The machine is a Xeon 2.6 with 512MB RAM, a 160GB SATA disk, the
ethernet interfaces are one Intel PRO/1000 (onboard) and one RealTek
RTL8139 (add-on)
The board has one onboard firewire interface, but it's disabled.
I had tried first with 1.2Beta3 (I already had a CD-R, and intended to
make the upgrade later), but after the error appeared I downloaded RC2,
but result was the same. The machine is currently running Debian Etch (I
intended to overwrite that install), and does not seem to have hardware
problems.
Any idea of what may be happening?
--
-----------------------------------------------------
Marcos Roberto Greiner
Os otimistas acham que estamos no melhor dos mundos
Os pessimistas tem medo de que isto seja verdade
Murphy
-----------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
