You've got the same subnet on both your LAN and OPT1 interfaces... You'll need to change one of them to something besides 192.168.2.x/24 for routing to work properly.
Tim Nelson Systems/Network Engineer Rockbochs Inc. (218)727-4332 ----- Original Message ----- From: "MyStiC" <[EMAIL PROTECTED]> To: support@pfsense.com Sent: Thursday, October 4, 2007 11:09:23 AM (GMT-0600) America/Chicago Subject: [pfSense Support] NAT or rule? WAN = DHCP (ISP provided) LAN = 192.168.2.150, DHCP server 192.168.2.0/24 OPT1 = DHCP IP192.68.2.152/24 GTWY192.168.2.101 OPT1 connects to separate router (PPPoE WAN) which handles VPN connections When I follow the outbound NAT steps for load balancing the WAN & OPT1, I cannot ping OPT1's gateway or get any other traffic there either. How can I allow traffic coming from/to OPT1 to LAN? --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]