You dont need different GW for the PCs in the LAN. Your LAN interface has one IP address. The PCs in the LAN have the LAN interface IP address as their GW.
You set up LAN rules : source IP, port : PC1, any dest ip,port : any,any gateway WAN source IP, port : PC2, any dest ip,port : any,any gateway WAN2 hth sai On 10/2/07, Ingvald Grimstveit <[EMAIL PROTECTED]> wrote: > > Current setup: > 1x WAN PPPoE > (running PPTP VPN server on pfSense with local user db.) > > > Need: > 1x Additional WAN > > > Configuration would be: > -Different GW for computers on same LAN (inside) > > -Port forwarding rules for the two WAN's > e.g. > port 80 from WAN1 to 192.168.10.10 (GW for .10 would be WAN1) > port 3389 from WAN2 to 192.168.10.12 (GW for .12 would be WAN2) > and more > > This implies 2x IP on LAN if. > > > Question: > Can this be done (easily)? > If so what kind of WAN2 subscription do I need (not another PPPoE i think). > > > best regards > Ingvald > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]