Inbound or outbound load balancing? --Bill
On 10/9/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > Hi There, > > Im using 1.2 RC2 on Intel boxes. I have the load balancer setup and working, > the two machines are syncing settings and the carp is working properly. > However, if I reboot the primary firewall the secondary takes over pings, but > the load balancing doesnt work again until the primary is back online. > > Everything seems to be ok, when the primary disappears, the ping drops 1 > packet, then the secondary carries on and everything runs ok. The servers on > the lan interface of the firewall can route out to the internet fine whilst > running with only the secondary firewall. The only thing not to work is the > load balancer. > > Anyone have any ideas? > > I have it wired as: > > INTERNET --> PIX 515 PAIR --> 2X CISCO 3550-EMI --> PFSENSE PAIR --> 2X > CISCO 3550-EMI --> LAN > > Each of the pix/pfsense are connected to seperate switches, which are in turn > linked together. > > Thanks in advance, > > Lee > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]