I thought I had NAT set up properly, but when I went to plug it in the things that needed to access the network couldn't. Are there some detailed step by step tutorials around that might can assist me in setting up 1:1.
Current Setup External: 206.63.66.0/27 Internal: 10.20.10.0/21 I need to have 206.63.66.195 -----> 10.20.10.14 smtp I am overlooking something, I just do not know what. I've done what I thought was logical 1. Created a virtual ip 206.63.66.195 2. Added 1:1 - WAN 206.63.66.195/32 -----> 10.20.10.14/32 3. Created rule to allow smtp to 206.63.66.195 I also tried a port forward with no success. Thanks for assistance. Russ --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]