I have 4 pfsense boxes in our DC running on Supermicro 5015M-MR+
systems. With PDSMi+ Boards.
Intel 3000 chipsets.
C2D 2.4Ghz
1G ram
4 intel em0 cards
These boxes have are rock solid with 1.0.1. When I bring any of them up
to 1.2 (Have tested RC1 2 and 3) they won't last 1/2 an hour. The system
crashed with a page fault and reboots. The boxes are stable with Freebsd
6.2 on them, under pretty heavy load. I am leaning towards this being
caused by a sysctl setting that changed between 1.0.1 and 1.2... That or
the SMP kernel.
Anyone have any thoughts on this?
================================================
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.1-RELEASE-p10 #0: Sun Oct 29 01:06:20 UTC 2006
[EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/pfSense.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2394.01-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>
>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1072562176 (1022 MB)
avail memory = 1040416768 (992 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci9: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0x4000-0x403f mem 0xe0240000-0xe025ffff,0xe0200000-0xe023ffff irq 24 at
device 1.0 on pci10
em0: Ethernet address: 00:1b:21:08:38:26
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0x4040-0x407f mem 0xe0260000-0xe027ffff,0xe0280000-0xe02bffff irq 25 at
device 1.1 on pci10
em1: Ethernet address: 00:1b:21:08:38:27
pci9: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib4
em2: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0x5000-0x501f mem 0xe0300000-0xe031ffff irq 16 at device 0.0 on pci13
em2: Ethernet address: 00:30:48:8e:df:fa
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci14: <ACPI PCI bus> on pcib5
em3: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0x6000-0x601f mem 0xe0400000-0xe041ffff irq 17 at device 0.0 on pci14
em3: Ethernet address: 00:30:48:8e:df:fb
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci15: <ACPI PCI bus> on pcib6
pci15: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3030-0x303f at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 1.000 msec
Fast IPsec: Initialized Security Association Processing.
ad0: 76319MB <Seagate ST380815AS 3.AAD> at ata0-master SATA150
acd0: CDROM <CD-224E-N/1.AA> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
em2: promiscuous mode enabled
em1: promiscuous mode enabled
pflog0: promiscuous mode enabled
em1: link state changed to UP
em3: link state changed to UP
===================================================================
