Unless one wants to install the dev package and do a who lot of work the answer is no you cant.
In my exp. That is the precursor to drive failure and should have a drive failure alert ( light on) the best way to check it is to take it offline and use smart start or what ever tool they call it now. The good news is that in the event you do lose your drive controller, PFsense still will route, you just lose the UI. ( Did I thank the dev god who made it so I didn't have to cut my vacation?) -----Original Message----- From: Bill Marquette [mailto:[EMAIL PROTECTED] Sent: Monday, December 03, 2007 12:37 PM To: [email protected] Subject: Re: [pfSense Support] Monitor raid status ciss You might ask this on one of the FreeBSD mailing lists, I'm not sure if it's possible to get this info in FreeBSD or not. --Bill On Dec 3, 2007 12:03 PM, Ugo Bellavance <[EMAIL PROTECTED]> wrote: > Hi, > > How could I check if there is failed drive on my server? It's using > the ciss driver. > > ciss0: <HP Smart Array E200> port 0x4000-0x40ff mem > 0xfdf80000-0xfdffffff,0xfdf70000-0xfdf77fff irq 16 at device 8.0 on pci11 > > da0 at ciss0 bus 0 target 0 lun 0 > da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device > da0: 135.168MB/s transfers > da0: 152593MB (312511680 512 byte sectors: 255H 32S/T 38298C) > > I've googled a bit and I can only find "check the logs" for answers. > > 1- is there a better solution? Like an equivalent of amrstat? > 2- if that's the only solution, someone has an example of what a failed > drive log entry would look like? > > Regards, > > Ugo > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
