Hi! we have some problems with Olicom Token Ring Hardware Free Bsd supports this hardware with the oltr(4) driver. Pfsense boots up, and shows the pci Tokenring Hardware while booting up correctly, but also tell "no driver attachd" at the same time (same Line).
After bootup is completed, only the ethernet - Interface can be configured. The Token-Ring Interface is not shown after bootup. No IP / Mask can be configured. Is there a easy way to solve this problem? Below is a listing from the HW-Support-List (freebsd 6) (...) 3.3 Token Ring Interfaces The oltr(4) driver supports the following ISA based Olicom Token Ring adapters: * Olicom OC-3115 * Olicom ISA 16/4 Adapter (OC-3117) * Olicom ISA 16/4 Adapter (OC-3118) The following PCI based adapters are supported: * Olicom PCI 16/4 Adapter (OC-3136) * Olicom PCI/II 16/4 Adapter (OC-3137) * Olicom PCI 16/4 Adapter (OC-3139) * Olicom RapidFire 3140 16/4 PCI Adapter (OC-3140) * Olicom RapidFire 3141 Fiber Adapter (OC-3141) * Olicom RapidFire 3540 100/16/4 Adapter (OC-3540) (...) Many thanks, Heinrich ------------------------------------------- Heinrich Pechtold Staatliche Berufsschule Lichtenfels Telefon 09571 - 95740 [EMAIL PROTECTED] sent by SQUIRRELMAIL v.1.44 via Lotus Notes ------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]