Hi, While trying to install Pfsense on a box I come across the following error:
Fatal Trap 12: page fault while in kernel mode Fault virtual address = 0x10 Fault code = supervisor read, page not present Instruction pointer = 0x28:0xc0745010 Stack pointer = 0x28:0xc0c208f8 Frame pointer = 0x28:0xc0c208f8 Code segment = base 0x0, limit 0xfffff, type 0x1b = DPL0, pres1, def32 1, gran 1 Processor eflags = interrupt enabled, resume, IOPL = 0 Current process = 0 (swapper) Trap number = 12 Panic: page fault Uptime: 1s My hardware setup is as follows: 2 x D-Link DFE-580TX 4-Port 10/100 Mbps Ethernet Server PCI Adapter 1 x Intel Core 2 Duo E4500 2.2GHz 2MB 800Mhz FSB LGA775 Processor 1 x Intel Plum Creek D945GCPE Motherboard w/A8 + G + L + SATA2 1 x Seagate 80GB Barracuda SATA300 8MB 7200RPM Hard Drive w/NCQ 2 x Sony 52x CD-ROM Drive - OEM - Black 1 x Kingston DDR2-1066 1GB HyperX Memory Module What can I check / do ? Regards, Mike Lever Tenacity Films (Pty) Ltd t/a Velocity Films (T) +2711-807-0100 (F) 086-681-7518 http://www.velocityfilms.com CONFIDENTIALITY CAUTION: If you have received this communication in error, please note that it is intended for the addressee only, is privileged and confidential and dissemination or copying prohibited. Please notify us immediately by e-mail and return the original message. Thank you. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]