Luiz Vaz wrote:
Hi,
it's not enough!
Try to run it from the prompt with /usr/local/sbin/racoon -f
/var/etc/racoon.conf -F .
But kill the previous session with ps waux | grep -i racoon .
Maybe it´s just a 2 phase timout!
Best Regards,
Luiz Vaz
2008/12/2 Paul <joyride...@gmail.com <mailto:joyride...@gmail.com>>
IPSEC with shrewsoft has been working great and all of a sudden I
cant bring the tunnel up with the following log in pfsense.Nothing
has changed that I could point to
racoon: *[Self]*: INFO: 66.x.x.x[500] used as isakmp port (fd=20)
Dec 2 00:24:55 racoon: INFO: fe80::207:e9ff:fe07:c085%fxp0[500]
used as isakmp port (fd=19)
Dec 2 00:24:55 racoon: *[Self]*: INFO: 192.168.2.1
<http://192.168.2.1>[500] used as isakmp port (fd=18)
Dec 2 00:24:55 racoon: INFO: fe80::21b:21ff:fe1b:4c92%em0[500]
used as isakmp port (fd=17)
Dec 2 00:24:55 racoon: *[Self]*: INFO: 127.0.0.1
<http://127.0.0.1>[500] used as isakmp port (fd=16)
Thank you for any help
paul
Thanks for the reply. It was actually a conflict between 2 different vpn
clients I had installed on my laptop.Even though its been working
without issue for months. Once I removed both and reinstalled shrewsoft
it appears to be working.
