Markus Golser schrieb: > Hi, > > I'm using pfsense 1.2.2 embedded on an PC Engines ALIX.2C2 board. > My Wireless device is a Compex WLM54G23 200mW (miniPCI) card. > > ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 00:80:48:55:99:65 > inet6 fe80::280:48ff:fe55:9965%ath0 prefixlen 64 scopeid 0x3 > inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255 > media: IEEE 802.11 Wireless Ethernet autoselect mode 11b <hostap> > status: associated > ssid hotspot channel 3 (2422 Mhz 11b) bssid 00:80:48:55:99:65 > authmode OPEN privacy OFF txpower 31.5 scanvalid 60 bgscan > bgscanintvl 300 bgscanidle 250 roam:rssi11b 7 roam:rate11b 1 burst > -apbridge dtimperiod 1 > > On my laptop i see the device like this: > Cell 03 - Address: 00:80:48:55:99:65 > ESSID:"hotspot" > Mode:Master > Channel:3 > Frequency:2.422 GHz (Channel 3) > Quality=42/100 Signal level:-84 dBm Noise level=-127 dBm > Encryption key:off > IE: Unknown: 0007686F7473706F74 > IE: Unknown: 010482848B96 > IE: Unknown: 030103 > Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s > Extra:tsf=000000000d9c790d > Extra: Last beacon: 4136ms ago > > Picture of the setup: > http://picasaweb.google.com/elmargol/Public#5316314771640605810 > > --------------------------------------------------------------------- > To unsubscribe, e-mail: support-unsubscr...@pfsense.com > For additional commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > perhaps this will help:
http://forum.pfsense.org/index.php?action=printpage;topic=1007.0 --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
