I do agree with Tim. You need two different subnets. On Wed, Apr 22, 2009 at 7:31 PM, Tim Dickson <[email protected]> wrote: > Just looking at this quickly... looks like you are trying to route two > networks without having two networks. > What I mean is you have the same subnet for both of your networks, so the > pfsense boxes don't know whether to route internally or push to the other > pfsense box. > You need a separate subnet for each physical network so that routing can > occur. > I may be reading your setup wrong - but that's what it looks like to me. > -Tim > > -----Original Message----- > From: Brian Josefsen [mailto:[email protected]] > Sent: Wednesday, April 22, 2009 3:22 PM > To: [email protected] > Subject: [pfSense Support] bridging 2 networks with pfsense+openvpn > > Hi > > I have 2 pfsense boxes, one embedded on each side of the atlantic > ocean. They connect fine, but i can't contact any of the other side, > both side have the pfsense as a primary gw. > > network 192.168.1.0/24 > Box local is 192.168.1.241 > Box remote is 192.168.1.242 > > I can only reach the other box with a ssh login to one of the boxes > and use ssh to the other box's ipaddress on the tun adapter. > > Do I need fw rules, or am I missing some commands? > > -- > Med venlig hilsen / Best regards > Brian Josefsen > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > Commercial support available - https://portal.pfsense.org > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > Commercial support available - https://portal.pfsense.org > >
--------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
