Hi,
When reading several posts, I found much info about load balancing... but this is something I don't need. What I would like to have, is to route all internet traffic through one interface (an PPPoE session), and some traffic (terminal server & smtp) from the other interface (incoming). If I read a bit further on, it seems that you best dedicate the WAN interface to the actual traffic, to be able to use the most out of packages... And, that OPT1 is for the other interface to allow incoming traffic to our terminal server and mail-server. Currently I have one xDSL connection, that will be for all common traffic, and I have one SDSL connection to allow my external co-workers to join the terminal server. (the connection will be shared for smtp traffic - for that I shall use QoS to allow my terminal sessions to be the most priority). To put it simple (I think), is that OPT1 should be treated as incoming traffic, and WAN should only be used for outgoing traffic (eg. internet, radio, downloading, ...) Hope this makes sense... kind regards --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org