This is really a weird setting!
You are using a board that has been created and design to work with
Compact Flash.
I think It is a bit "strange" to try to use It with an IDE drive.
I would suggest that you use an embedded image as described in here:
http://blog.pfsense.org/?p=472
Then you can decompress the image (make sure you grab an image with
the right size (1Go - 2Go - 4Go) and simply use dd to grave the image
on your CF card.
# gunzip pfSense-1.2.3-1g-20090928-1005-nanobsd.img.gz
# cat pfSense-1.2.3-1g-20090928-1005-nanobsd.img | dd of=/dev/disk1
bs=16k
After that all you have to do is put the card in your Alix 2d13 and
boot…
If you want to see the output, just connect to the card using the
serial port.
And that's It. I don't see why you are trying to use an IDE drive with
this kind of hardware… ?
Bye
Le 4 oct. 2009 à 18:36, ozan ucar a écrit :
Hi everyone,
I have a alix 2d13 onboard.I need installation pfsense 1.2.3 on ide
disk.
http://forum.pfsense.org/index.php/topic,13509.0.html
I'm installation change config.xml for nic lan<vr0> wan <vr1> and
edit /etc/fstap and replace all disk name ad0 .
system when booting an error message ;
- http://www.cehturkiye.com/hpdiskerror.bmp
- http://www.cehturkiye.com/hperrordisk2.bmp
- http://www.cehturkiye.com/error.txt
What should I do ?
________________________________________________
«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Grégory Bernard
www.OsNet.eu
________________________________________________
«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
PGP ID --> 0x1BA3C2FD
---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com
Commercial support available - https://portal.pfsense.org
