Evgeny Yurchenko wrote:
I got very interesting results after moving to new kernel.
From:
[ ID] Interval Transfer Bandwidth
[ 3] 14090.0-14100.0 sec 799 MBytes 670 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 14100.0-14110.0 sec 795 MBytes 667 Mbits/sec
PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND
13 root 171 ki31 0K 8K RUN 1 24.3H 100.00% idle: cpu1
11 root 171 ki31 0K 8K CPU3 3 24.3H 100.00% idle: cpu3
39 root -68 - 0K 8K CPU2 2 401:49 97.17% em0 taskq
40 root -68 - 0K 8K CPU0 0 401:43 96.68% em1 taskq
14 root 171 ki31 0K 8K RUN 0 17.7H 11.08% idle: cpu0
12 root 171 ki31 0K 8K RUN 2 17.7H 10.79% idle: cpu2
To:
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 3.66 MBytes 3.07 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 10.0-20.0 sec 3.21 MBytes 2.69 Mbits/sec
PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND
11 root 171 ki31 0K 8K RUN 3 5:40 100.00% idle: cpu3
12 root 171 ki31 0K 8K CPU2 2 5:37 100.00% idle: cpu2
13 root 171 ki31 0K 8K CPU1 1 5:41 99.17% idle: cpu1
14 root 171 ki31 0K 8K CPU0 0 5:37 98.78% idle: cpu0
495 root 4 0 44808K 18540K accept 1 0:01 0.00% php
41 root 43 - 0K 8K WAIT 2 0:01 0.00%
em0_rx_kthread_0
42 root 43 - 0K 8K WAIT 1 0:01 0.00%
em0_rx_kthread_1
46 root 43 - 0K 8K WAIT 0 0:00 0.00%
em1_rx_kthread_1
45 root 43 - 0K 8K WAIT 3 0:00 0.00%
em1_rx_kthread_0
Should I adjust something manually in config?
Evgeny.
---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com
Commercial support available - https://portal.pfsense.org
interesting in fact...
I guess I should wait then before trying it in production.
---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com
Commercial support available - https://portal.pfsense.org
