The external IP of the radius server has to be added to the radius servers client list or else it will reject authentication requests.
Mike From: Tancinco, Jon Sent: Wednesday, December 09, 2009 5:43 PM To: support@pfsense.com Subject: RE: [pfSense Support] Captive Portal RADIUS authentication - "Authentication error - Username and/or password invalid" Secret key works under m0n0wall and the same key is used in pfSense. Not sure what you mean about the IP of the NAS. Thanks for your help! Jon From: Michael Vinocur [mailto:michaelvino...@hotmail.com] Sent: Wednesday, December 09, 2009 2:28 PM To: support@pfsense.com Subject: Re: [pfSense Support] Captive Portal RADIUS authentication - "Authentication error - Username and/or password invalid" Could be the secret key or check is you added the IP of the NAS. Mike From: Tancinco, Jon Sent: Wednesday, December 09, 2009 11:37 AM To: support@pfsense.com Subject: [pfSense Support] Captive Portal RADIUS authentication - "Authentication error - Username and/or password invalid" Same error on Versions 1.2.2 and 1.2.3 Using the pfSense Captive Portal. I am getting the "Authentication error - Username and/or password invalid." message when trying to authenticate. The password is correctly submitted, but get the error everytime. RADIUS server reports incorrect password. Using m0n0wall, Captive Portal and RADIUS authentication works with no problems using the same username, password and RADIUS server. Any help would be appreciated. Jon