Joseph, 1. Choose VPN -> PPTP
2. Mark the option "Enable PPTP server" 3. Choose a server address (a different IP of your server, be sure it is configured as a Virtual IP) and Remote address range. Here my gateway is 192.168.7.1 and has a Virtual IP (CARP) 192.168.7.35 wich is the IP I fill the "Server address" in PPTP. On "Remote Address" I've filled 192.168.7.208 since the mask is 28. 4. Save the configuration 5. Choose the "Users" tab 6. Add users you want (you don't need to specify an IP address for users). Think it's done. Cya On Tue, Jan 19, 2010 at 12:59 AM, Joseph Rotan <joseph.ro...@gmail.com>wrote: > Hi, > > after installing pfsense i'm having difficulties configuring VPN PPTP on it > is there anyone can help me out it configuring from basic. > > Joseph. > > > > > On Fri, Jan 8, 2010 at 11:41 PM, bsd <b...@todoo.biz> wrote: > >> Hello, >> >> Can someone let me know if there is a way to reset the default timeout for >> PPTP timeout on pfSense. >> It looks like the default timeout is set to something like 5min and I'd >> like to a much longer period. >> >> Which file / config parameter should I modify ? >> >> >> Thanks. >> >> >> ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ >> Gregober ---> PGP ID --> 0x1BA3C2FD >> bsd @at@ todoo.biz >> ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ >> >> P "Please consider your environmental responsibility before printing this >> e-mail" >> >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: support-unsubscr...@pfsense.com >> For additional commands, e-mail: support-h...@pfsense.com >> >> Commercial support available - https://portal.pfsense.org >> >> >
