Hi Josep, A. For VPN config make this: 1. Configure a Port Forward from IP 245.7.10.160 port 1194 (openvpn default port) to IP 172.16.4.2 port 1194. This config is NOT for Pfsense, it is for a equipment whith IP 245.7.10.160 (this is only accesible from internet). 2. Configure a vpn server an the "Custom Option" put: <code> push "route 192.168.X.0 255.255.255.0" </code>. Where 192.168.X.0 is your "subnet LAN" address behind Pfense.
B. Pfsense not need the custom configuration for NAT-ing (it's done by default config). Best Regards, Catalin. On Mon, May 17, 2010 at 4:28 AM, Joseph Rotan <[email protected]>wrote: > Hi, > > I have a pfsense that is connected via satellite link (VTSAT) on a remote > site, but i'm having problems trying to configure VPN on it since there is a > different static IP address assign to my WAN interface that corresponse to > the public IP address: > > My IP address details as follows: > > WAN IP 172.16.4.2 > Subnet mask 255.255.255.252 > Default gateway 172.16.4.1 > > The public IP address that corresponse to my pfsense WAN IP is 245.7.10.160 > > Is there anyone who can guide me in setting up a NAT on my pfsense 1.2.3 > > > Appreciate any help. > > > > Thanks, > > > Joseph. >
