On Fri, Jun 25, 2010 at 10:55 AM, Domenico De Monte <[email protected]> wrote: > Hi, > i use pfsense 1.2.3-RELEASE configured in bridge mode. > > I am testing bridge mode and i have a situation like this: > > pfsense ip = wan.ip(bge0) / lan.ip(bge1) (but in bridge it have to use only > wan.ip) > server ip = srv.ip > my ip = my.ip > internet gw = gw.net > > - pfsense in bridge mode is connected on both nic to a 2960 cisco switch > > - server is connected to another switch 2960 uplinked and setup as gw WAN IP > of pfsense. >
You can't do that with a bridge, a bridge is transparent. The gateway must be something upstream. If you want a setup like that, you need to set it up to properly route so the gateway is on an inside interface. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
