If you have 3 nics on pfsense device, you could build a DMZ w/ the static subnet. Otherwise, likely you want to add "virtual IP" entry for the static subnet, or individually, then build NAT/port forward rules for your individual needs. On pfsense 1.2.3, look under Firewall ->Virtual IPs.
Gordon ----- Original Message ----- From: "Matthew Taylor" <mtay...@mtcsonline.net> To: support@pfsense.com Sent: Tuesday, July 20, 2010 12:23:42 PM Subject: RE: [pfSense Support] Static Address from AT&T Well, i want to use one for terminal services on one machine, ill use another one for a webserver, and email server for testing, etc Matthew Taylor MTCS - IT Professional MTCSonline.net mtay...@mtcsonline.net 661-427-0480 - Office 661-427-0482 - Fax 661-477-9363 - Cell From: Gordon Russell [russ...@clarkecounty.gov] Sent: Tuesday, July 20, 2010 9:18 AM To: support@pfsense.com Subject: Re: [pfSense Support] Static Address from AT&T Yes they can be used. How you configure them in pfsense depends on what you want to do with them. ----- Original Message ----- From: "Matthew Taylor" <mtay...@mtcsonline.net> To: support@pfsense.com Sent: Tuesday, July 20, 2010 12:10:23 PM Subject: [pfSense Support] Static Address from AT&T I get 5 static and 1 DHCP address from AT&T. How can I add this additional network into pfSense? is this possible at all? Matthew Taylor MTCS - IT Professional MTCSonline.net mtay...@mtcsonline.net 661-427-0480 - Office 661-427-0482 - Fax 661-477-9363 - Cell