Hi,
I have the following situation that I wonder if it can be solved with one
pfsense box (1.2.3 of 2.0).
- I need to setup a pfsense box with two VPN tunnels to two (client)
networks (site to site). These two networks have an overlapping address
space. Can this be done?
- No traffic between these two networks is allowed because of the following
bullet:
- Next, there are two groups of home users. Group one users need VPN access
to network 1 but not to network 2. For Group two users it should be the
other way around.
Is it possible to configure the pfsense box for this setup? Will it be
possible without NAT (because of the overlapping address space)? What are
the restrictions with this setup?
--------- home VPN users 1 ----------|-----------|------ site2site VPN site
1 ---|--------|
| |
| Site 1 |
| pfsense |
|--------|
| box |
|--------|
| |
| Site 2 |
--------- home VPN users 2 ----------|-----------|------ site2site VPN site
2 ---|--------|
I hope that somebody has this experience!
Kind regards,
Hent
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
