I think we are getting closer to solving this issue… I am putting pressure on the manufacturer of these devices so they can give us more info. I've copied recent messages from the list, hopping this could help them.
But at this stage I don't really know what would really help us solve the issue we are facing so any help from knowledgeable persons would be appreciated. I can then try to pressure them to provide us with the needed infos… Thanks. Le 22 nov. 2010 à 23:46, Gavin Spurgeon a écrit : > >> Try to find out what sort of emulation the screen uses, most likely it >> will use one of the existing drivers for output. > > I have found on the back of the LCDs PCB 'SC2002D rev1' so then found > (via Google) that it is probably a 'Sunlike Display Tech. Corp' LCD. > that lead me to find this URL @ > http://lists.omnipotent.net/pipermail/lcdproc/2006-August/011029.html > > That says:- >>> According to the SPECs I found google'ing it is driven by a >>> controller that is compatible to a KS0066, which -anoother >>> google'ing round - should be HD44780 compatible. >>> The hd44780 is supported by LCDproc using various wiring schemes. > > I confirmed that the SC2002D is indeed KS0066 compatible via this URL @ > http://www.datasheetarchive.com/SC2002-datasheet.html > ---> > http://www.datasheetarchive.com/pdf-datasheets/Datasheets-29/DSA-566292.html > > The .pdf (Attached) says... > "BUILT-IN CONTROLLER (KS0066 OR EQUIVALENT)" > >> Each driver is specific to a display, most communicate via serial, usb >> serial or parallel port interfaces. > > The LCD on the TEAK3035 is Serial, Detected by pfSense as /dev/cuad1 > not /dev/cua1 as the LCDproc Package assumes. :-( > >> You will need to find out if it uses a existing signaling method via the >> supplier. If it does not use some sort of existing signaling I would >> press the vendor for providing a lcdproc driver. > > I have no idea where to even start with this.... > > But maybe with the info above, Seth are you able to help and point me in > any other direction that might get this display working ? > i.e. the /dev/cuad1 != /dev/cua1 and so on.... > > -- > > Gavin Spurgeon. > AKA Da Geek > > ---------------------------------------------------------------------- > "The happiest of people don't necessarily have the best of everything, > they just make the most of everything that comes along their way.." > <SC2002D-datasheet.pdf> –––––––––––––––––––––––––––––––––––––––––––––– ---------> Grégory Bernard Director <--------- ---------------> www.osnet.eu <--------------- --> Your provider of OpenSource appliances <-- –––––––––––––––––––––––––––––––––––––––––––––– OSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetO --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
