On Sun, Dec 5, 2010 at 6:22 PM, Alex Threlfall <a...@cyberprog.net> wrote: > Hi All, > > Doing some testing here, and this might not be the best place to ask > but thought I'd start off here! > > I'm running a pair of pfSense 2.0 Beta 4 LiveCD's back to back with > a pair of WAN connections between them via x-over cat5's. Fairly normal > hardware, HP DL360 G3's with a Dual Port Intel FXP Card (onboard BGE is lan) > > I'm trying to prove that I can run two IPSec VPN's between the > boxes, to provide some fault tolerance, however I can only get the VPN's to > link up on the WAN interface, despite specifying on both boxes that the > second VPN should be on OPT1 (or WAN1 which I've named it). >
You can't do that with tunnel mode. Either use transport mode + GRE or gif + OSPF or BGP, or OpenVPN + OSPF or BGP. --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
