Thanks for explaining. I wanted to use haproxy and this was not starting. The reason as someone suggested is that the VIP must be a CARP ip. http://forum.pfsense.org/index.php?topic=21748.0
<http://forum.pfsense.org/index.php?topic=21748.0>I'm on 1.2.3-RELEASE. ShiB. while ( ! ( succeed = try() ) ); On Thu, Jan 13, 2011 at 6:38 PM, Jim Pingle <li...@pingle.org> wrote: > On 1/13/2011 5:29 AM, Shibashish wrote: > > My WAN ip is xx.xx.87.44 > > > > I am trying to add a Virtual IP CARP as xx.xx.93.193, but i am not able > to. > > > > Sorry, we could not locate an interface with a matching subnet for > > xx.xx.93.193/27. Please add an ip in this subnet on a real interface. > > > > I want the carp ip to be used for haproxy without which haproxy doesnt > > start. How do i add this? Thanks. > > CARP VIPs have to be in the same subnet as an existing IP address on the > interface. > > On 1.2.x, this means it must be in the same subnet as the WAN IP. On 2.0 > you can also add an IP alias VIP inside of the same subnet as > x.x.93.193/27 and then you can add a CARP VIP for x.x.93.193/27 > > If this is part of a CARP cluster, each unit will need a separate IP > alias inside of that subnet (the same way they each need an IP in the > WAN subnet). If it's a standalone unit you may as well use an IP alias > in place of a CARP VIP. > > Jim > > --------------------------------------------------------------------- > To unsubscribe, e-mail: support-unsubscr...@pfsense.com > For additional commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > >
