Mmm... according to Cisco: http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800ef7b2.shtml
you shouldn't do an ip route 0.0.0.0 0.0.0.0 to an interface. The page I linked above gives some explanations why. One key problem is that with 0x8 to an interface, *all* addresses are considered to be directly connected. Rgds, On 2011-01-21, Danny <metal...@gmail.com> wrote: > Yes. > > ip route 0.0.0.0 0.0.0.0 FasthEthernet 0/0 > > Surprisingly, it started working without doing aparently nothing.... I will > recreate the situation again, because the environment is virtual pfsense, > virtual XP, with VMWare using GNS3... maybe that causes that weird > behaviour. > > thanks a lot > Rgards > > On Fri, Jan 21, 2011 at 12:52 PM, Pandu Poluan <pa...@poluan.info> wrote: > >> Have you configured the Cisco router with a static route to the XP's >> network? >> >> Rgds, >> >> >> On 2011-01-21, Danny <metal...@gmail.com> wrote: >> > Hi, >> > >> > I´ve got a 1.2.3 pfSense connected this way: >> > >> > XP ----> [LAN] PFSense [WAN] ---> [WAN] Cisco router [LAN] >> > >> > I can ping from XP to LAN and WAN pfsense interfaces, but cannot ping >> > WAN >> > Cisco router interface >> > I can ping from PFSense WAN to Cisco WAN interface >> > Can not ping from XP to Cisco Router WAN, if pfSense LAN is not Bridged >> with >> > WAN >> > >> > Is that correct? >> > >> > The purpose is to configure pfsense as a router (disabling firewalling) >> > >> > Thank you >> > >> > -- >> > meta >> > >> >> -- >> Sent from my mobile device >> >> -- >> Pandu E Poluan - IT Optimizer >> My website: http://pandu.poluan.info/ >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: support-unsubscr...@pfsense.com >> For additional commands, e-mail: support-h...@pfsense.com >> >> Commercial support available - https://portal.pfsense.org >> >> > > > -- > dpc > -- -- Pandu E Poluan - IT Optimizer My website: http://pandu.poluan.info/ --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org