Just upgraded to RC 2 will check this now and update my findings On 6/10/11, Roberto Nunnari <roberto.nunn...@supsi.ch> wrote: > Mr Router wrote: >> It is required to use reset states some time is real time traffic is >> running form the IP on which you are applying the rules , but commonly >> it works without it.reboot is not required ! > > It doesn't work like that for me.. I just delete or add the rule that > let me in to the wan interface ip from an ip on the wan, but it doesn't > work until the pfSense box is rebooted. > > 1) delete rule > 2) save > 3) apply changes > 4) access from the wan still works! > 5) reset states > 5) access from the wan still works! (once still worked for a couple of > minutes, then became unreacheable from wan) > 6) after 15 minutes that it is still reacheable from wan, reboot > 7) access from the wan is now denied > 8) add again the firewall rule > 9) save and apply changes > 10) access from the wan still doesn't work! > 11) reset states > 12) access from the wan still doesn't work! > 13) reboot > 14) access from the wan works again > > As you see, apart from once, it always need a reboot to apply a simple > rule delete or add! > > I even reset pfSense to the factory defaults, but nothing change. > > So.. it is this a bug in 2.0-RC2 or is it some misconfiguration on my side? > > Best regards. > Robi > > >> >> >> On Fri, Jun 10, 2011 at 12:45 PM, Roberto Nunnari >> <roberto.nunn...@supsi.ch <mailto:roberto.nunn...@supsi.ch>> wrote: >> >> David Burgess wrote: >> >> On Thu, Jun 9, 2011 at 10:59 AM, Roberto Nunnari >> <roberto.nunn...@supsi.ch <mailto:roberto.nunn...@supsi.ch>> >> wrote: >> >> Hi. >> >> I just discovered that modifications to the firewall rules >> will not be >> active until the box is rebooted.. >> >> Is it a known bug or a misconfiguration on my side? >> >> >> Did you try this? >> >> http://doc.pfsense.org/index.php/Reset_States >> >> db >> >> >> I'll try that, too. >> Thank you. >> Robi >> >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: support-unsubscr...@pfsense.com >> <mailto:support-unsubscr...@pfsense.com> >> For additional commands, e-mail: support-h...@pfsense.com >> <mailto:support-h...@pfsense.com> >> >> Commercial support available - https://portal.pfsense.org >> >> >> >> >> -- >> ----------------------------------------- >> Regards, >> >> Mr.Router > > > -- > Roberto Nunnari > Servizi Informatici SUPSI-DTI > SUPSI-DTI - Via Cantonale - 6928 Manno - Switzerland > helpdesk email: mailto: helpd...@dti.supsi.ch > direct email: mailto:roberto.nunn...@supsi.ch > tel: +41-58-6666561 > > --------------------------------------------------------------------- > To unsubscribe, e-mail: support-unsubscr...@pfsense.com > For additional commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > >
-- Sent from my mobile device ----------------------------------------- Regards, Mr.Router --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org