Okay, glad it solved the problem :)
_____ Van: Nick Upson [mailto:n...@telensa.com] Verzonden: donderdag 4 augustus 2011 14:48 Aan: support@pfsense.com Onderwerp: Re: [pfSense Support] fx5624 install - new problem that was it, a colegue pointed me in that direction a few mins ago, it threw me that the giga ports do have it but the 10/100 didn't On 4 August 2011 13:41, Bart Grefte <b...@ravenslair.nl> wrote: Have you tried other cables and hardware connected to the other end? Instead of cross, try straight cables or the other way round. And set the ports on the other end manually to 10 or 100Mb might also be something to try. Maybe those ports don't support autosensing/autonegotiation, that can cause issues sometimes. _____ Van: Nick Upson [mailto:n...@telensa.com] Verzonden: donderdag 4 augustus 2011 14:14 Aan: support pfsense Onderwerp: [pfSense Support] fx5624 install - new problem Hi, having got pfsense 1.2.3 to install on the box I've now got a new problem. I can't get the 10/100M ports to work. If I go into the shell and do "ifconfig" all interfaces are present but these ports always show "status: no carrier" with or without a cable to another PC plugged in I realise that this may be a hardware issue but I thought it best to check here in case there is something else I can do -- Nick Upson (01799 533252) -- Nick Upson (01799 533252)