Hi, Did you use the gateway group in firewall rules?? 2011/8/25 greg whynott <greg.whyn...@gmail.com>
> Hi, > > We have 2 DSL modems connected to the same network (192.168.2.1 and .2 ) as > the pfsence box is connected to (192.168.2.10). I've configured them into > a Gateway group after defining the 2 under the 'gateway' tab (system - > routing) and assigned them all the same 'Tier 1' level. Under Firewall > rules I added a 'pass all' rule and for the gateway under the Advanced > features section i selected the aforementioned gateway group. > > access to the internet works, and if i reboot the active modem, the > connections will fail over to the surviving modem. but i am not seeing it > balance oubound connections when both modems are up. I've loaded multiple > 'what is my ip' pages from various sources threwout the day, and then fired > off a bunch of downloads to saturate the link, but still nothing appears to > be going down the other dsl line. > > > I got a hold of a copy of "pfsence the definitive guide", under section 11 > it talks about this, but it appers it is for an earlier version, as the > version i'm using does not have the options it speaks of. it looks more > like a server load balancing area now. > > I am using version: > *2.0-RC3 * (i386) > built on Tue Jun 21 16:50:25 EDT 2011 > > > any idea what it may be? I'm thinking I should of gotten the current > version and not a pre release. 8) > > thanks for your time, > greg > > > > -- Younes EL AMRAOUI *Engineering Student at ESIREM.* *Computer Science Engineering School.* *+33629153757* *Dijon ,FRANCE .*
