Am Sonntag, den 01.12.2019, 14:57 +0100 schrieb Andreas Gajda: > Hallo Everyone, > > I'm trying to create a video session over XMPP jingles protocoll. I > always get an error window and several error messages. > > I'm using the fedora 31 version, but also compiled the same version > from source, with no difference: > $pidgin --version > Pidgin 2.13.0-15.fc31 (libpurple 2.13.0) > > (Other programs show the webcam video with no problem.) > > After many hours of online search and testing, I've narrowed it down, > that my webcam seems to use a video format, which is not support by xv. > For example, this ends with an error: > > gst-launch-1.0 v4l2src device=/dev/video0 ! xvimagesink > Leitung wird auf PAUSIERT gesetzt ... > Leitung ist aktiv und erfordert keinen VORLAUF … > Leitung wird auf ABSPIELEN gesetzt ... > FEHLER: Von Element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: > Internal data stream error. > Zusätzliche Fehlerdiagnoseinformation: > gstbasesrc.c(3072): gst_base_src_loop (): > /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: > streaming stopped, reason not-negotiated (-4) > > but this works: > gst-launch-1.0 v4l2src device=/dev/video0 ! jpegdec ! xvimagesink > > Using GST_DEBUG=*:4 I've got the following format information: > INFO GST_ELEMENT_PADS > gstelement.c:912:gst_element_get_static_pad: no such pad 'sink' in > element "v4l2src0" > INFO v4l2 > gstv4l2object.c:1201:gst_v4l2_object_fill_format_list:<v4l2src0:src> > got 2 format(s): > INFO v4l2 > gstv4l2object.c:1205:gst_v4l2_object_fill_format_list:<v4l2src0:src> > YUYV > INFO v4l2 > gstv4l2object.c:1205:gst_v4l2_object_fill_format_list:<v4l2src0:src> > MJPG > Leitung wird auf ABSPIELEN gesetzt ... > INFO v4l2 > gstv4l2object.c:4252:gst_v4l2_object_probe_caps:<v4l2src0:src> probed > caps: video/x-raw, format=(string)YUY2, width=(int)640, > height=(int)480, pixel-aspect-ratio=(fraction)1/1, > framerate=(fraction)30/1; video/x-raw, format=(string)YUY2, > width=(int)640, height=(int)360, pixel-aspect-ratio=(fraction)1/1, > framerate=(fraction)30/1; video/x-raw, format=(string)YUY2, > width=(int)424, height=(int)240, pixel-aspect-ratio=(fraction)1/1, > framerate=(fraction)30/1; video/x-raw, format=(string)YUY2, > width=(int)320, height=(int)240, pixel-aspect-ratio=(fraction)1/1, > framerate=(fraction)30/1; video/x-raw, format=(string)YUY2, > width=(int)320, height=(int)180, pixel-aspect-ratio=(fraction)1/1, > framerate=(fraction)30/1; video/x-raw, format=(string)YUY2, > width=(int)160, height=(int)120, pixel-aspect-ratio=(fraction)1/1, > framerate=(fraction)30/1; image/jpeg, width=(int)1280, height=(int)720, > pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1; image/jpeg, > width=(int)960, height=(int)540, pixel-aspect-ratio=(fraction)1/1, > framerate=(fraction)30/1; image/jpeg, width=(int)848, height=(int)480, > pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1; image/jpeg, > width=(int)640, height=(int)480, pixel-aspect-ratio=(fraction)1/1, > framerate=(fraction)30/1 > > Is there a way to configure pidgin,e.g for using a stream converter for > input or output? I've no experience in gstreamer programming, but if I > can modify the source code to create a pipeline, like above, this could > solve my problem. Any hint is appreciated. > > Thank you very much in advance! > Andreas > > _______________________________________________ > Support@pidgin.im mailing list > Want to unsubscribe? Use this link: > https://lists.pidgin.im/listinfo/support Hello,
after some digging in libpurple, I've found that there is already some video converting in place. But I've found another error in the logs with more logging enabled: (17:22:40) jingle-rtp: jingle_rtp_codecs_changed_cb: session_id: audio-session jingle_session: 0x1ae4560 (17:22:40) jingle-rtp: jingle_rtp_codecs_changed_cb: session_id: audio-session jingle_session: 0x1ae4560 (17:22:40) backend-fs2: got new local candidate: 6 (17:22:40) backend-fs2: got new local candidate: 5 (17:22:40) backend-fs2: got new local candidate: 4 (17:22:40) backend-fs2: got new local candidate: 6 (17:22:40) backend-fs2: got new local candidate: 5 (17:22:40) backend-fs2: got new local candidate: 4 (17:22:40) backend-fs2: got new local candidate: 1 (17:22:40) backend-fs2: got new local candidate: 2 (17:22:40) backend-fs2: got new local candidate: 3 (17:22:40) backend-fs2: got new local candidate: 7 (17:22:40) backend-fs2: got new local candidate: 8 (17:22:40) backend-fs2: got new local candidate: 9 (17:22:40) backend-fs2: got new local candidate: 1 (17:22:40) backend-fs2: got new local candidate: 2 (17:22:40) backend-fs2: got new local candidate: 3 (17:22:40) backend-fs2: got new local candidate: 7 (17:22:40) backend-fs2: got new local candidate: 8 (17:22:40) backend-fs2: got new local candidate: 9 (17:22:40) jingle-rtp: jingle_rtp_candidates_prepared_cb (17:22:40) jingle: jingle_iceudp_finalize (17:22:40) jingle: jingle_transport_finalize (17:22:40) jingle-rtp: jingle_rtp_codecs_changed_cb: session_id: video-session jingle_session: 0x1ae4560 (17:22:40) mediamanager: gst pipeline error: remote error: error set output format: -22 (17:22:40) mediamanager: Debug details: ../src/gst/gstpipewiresrc.c(950): on_remote_state_changed (): /GstPipeline:pipeline0/GstBin:vvconfig- videosrc/GstBin:pidgindefaultvideosrc/GstAutoVideoSrc:autovideosrc0/GstPipeWireSrc:autovideosrc0-actual-src-pipewir (17:22:40) backend-fs2: gst error remote error: error set output format: -22 debugging: ../src/gst/gstpipewiresrc.c(950): on_remote_state_changed (): /GstPipeline:pipeline0/GstBin:vvconfig- videosrc/GstBin:pidgindefaultvideosrc/GstAutoVideoSrc:autovideosrc0/GstPipeWireSrc:autovideosrc0-actual-src-pipewir (17:22:40) media: Fehler mit Ihrer Webcam (17:22:40) media: Konferenzfehler I haven't found any information yet, which output format is used. Andreas _______________________________________________ Support@pidgin.im mailing list Want to unsubscribe? Use this link: https://lists.pidgin.im/listinfo/support
