Another suggestion, may work just fine try to change your CD to at least an
8x speed. Some Linux distributions seem to need higher speed, because of the
CD's copy method.
-----Mensaje original-----
De: dizzy <[EMAIL PROTECTED]>
Para: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Fecha: Domingo, 27 de Diciembre de 1998 04:51 p.m.
Asunto: Re: [SuSE Linux] CD Underrun error?
>
>
>
>John Assalone wrote:
>
>> I'm setting up a 486 with suse5.3. The computer has an ide 2x cd. I boot
>> with the disk created with setup and linuxrc starts up. When I chose the
cd
>> as the install source, the drive was accessed, but i then got a message
>> saying that the cd couldn't be mounted. I checked the kernel messages
and
>> found that both the hard disk and the cd were detected, but the last
message
>> was an ATAPI CD-ROM underrun error (or something to that effect).
>
>Not sure if this will help you but when youre booting up and get to the
first
>dialog box where its says something like
>load modules
>or
>automatically load modules
>see if choosing automatically loading modules works or if not try and
manually
>load the modules by the pulldown menu there
>rob
j. carlos luna
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archiv at http://www.suse.com/Mailinglists/suse-linux-e/index.html
