I did all what you say but I have two problems : Printing from win95 client
is very slowly and in some time the printing don 't work anymore , only
print ascii characters as if the driver for stcolor or epson (dot matrix)
not
work well. What 's happening with my system ?
BRUNO LUCIANI
[EMAIL PROTECTED]
>
>-----Mensaje original-----
>De: Col Wilson <[EMAIL PROTECTED]>
>Para: Pulls at the strings of others. <[EMAIL PROTECTED]>
>CC: General SuSE Mailing List <[EMAIL PROTECTED]>
>Fecha: Viernes, 19 de Febrero de 1999 03:45
>Asunto: RE: [SuSE Linux] Samba Printing
>
>
>>
>>
>>
>>> Linux so I thought I'd try. I have an EPSON 400 on my Win95
>>> machine. I used
>>> YaST to setup a printer via Samba and tried to print something.
>>> The printer
>>>
>>
>>
>>This works for me, but my printer is on the linux box:
>>
>>Set up printer in YAST as stcolor
>>set up samba
>>log onto tcp/ip net with your win98 machine.
>>If you can see the printer in network Neighbourhood so far so good.
>>right click on printer (probably lp1) and say install...
>>call it something like Samba Printer and print to it.
>>
>>hope this helps
>>
>>Col Wilson
>>
>>-
>>To get out of this list, please send email to [EMAIL PROTECTED] with
>>this text in its body: unsubscribe suse-linux-e
>>Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
>>archiv at http://www.suse.com/Mailinglists/suse-linux-e/index.html
>
>
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archive at http://www.suse.com/Mailinglists/suse-linux-e/index.html
