hallo
ich habe meine Suse 6.0 Evo von kernel 2.0.36 auf 2.2.3 gebracht
lprold
jetzt kann ich einen drucker nicht mehr ansteuern
getestet:
lsmod: Size Used by
4268 0 (unused)
lpc status:
queuing is enabled
printing is enabled
no entries
printer idle
und das bei ascii lp raw
lpc up all:
printing enabled
lpsc:connect:Connection refused
coudn't start daemon
bei ascii lp raw
booten: lpd started
KDE: Druckerwarteschlange-> Warning: no daemon present
Habe HP LASERJET 2p
YAST -> laserjet -> a4 -> Parallele Schnittstelle -> /dev/lp1 -> 300x300
boot.msg im anhang
wo kann ich den daemon starten ?
danke
stefan
Inspecting /boot/System.map
Symbol table has incorrect version number.
Inspecting /System.map
Loaded 6887 symbols from /System.map.
Symbols match kernel version 2.2.3.
Loaded 12 symbols from 3 modules.
klogd 1.3-3, log source = /proc/kmsg started.
<4>Linux version 2.2.3 (root@fehlbier) (gcc version 2.7.2.3) #4 Thu Mar 25 17:14:59
MET 1999
<4>Detected 200458996 Hz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 399.77 BogoMIPS
<4>Memory: 63164k/65536k available (920k kernel code, 412k reserved, 980k data, 60k
init)
<4>CPU: Intel Pentium MMX stepping 03
<6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
<6>Checking 'hlt' instruction... OK.
<6>Intel Pentium with F0 0F bug - workaround enabled.
<4>POSIX conformance testing by UNIFIX
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb030
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>Linux NET4.0 for Linux 2.2
<6>Based upon Swansea University Computer Society NET3.039
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<4>Starting kswapd v 1.5
<6>parport0: PC-style at 0x378 [SPP,PS2]
<6>Detected PS/2 Mouse Port.
<6>Serial driver version 4.27 with no serial options enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9)
<7>Sound initialization started
<4><Sound Blaster 16 (4.16)> at 0x220 irq 5 dma 1,5
<4><Sound Blaster 16> at 0x330 irq 5 dma 0
<4>AWE32: not detected
<7>Sound initialization complete
<4>PIIX4: IDE controller on PCI bus 00 dev 39
<4>PIIX4: not 100% native mode: will probe irqs later
<4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
<4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>ncr53c8xx: at PCI bus 0, device 17, function 0
<6>ncr53c8xx: 53c875 detected with Tekram NVRAM
<6>ncr53c875-0: rev=0x03, base=0xe2410000, io_port=0x6500, irq=10
<6>ncr53c875-0: Tekram format NVRAM, ID 7, Fast-20, Parity Checking
<6>ncr53c875-0: on-chip RAM at 0xe2411000
<6>ncr53c875-0: restart (scsi reset).
<4>ncr53c875-0: Downloading SCSI SCRIPTS.
<4>scsi0 : ncr53c8xx - revision 3.1h
<4>scsi : 1 host.
<4> Vendor: IBM Model: DCAS-34330W Rev: S65A
<4> Type: Direct-Access ANSI SCSI revision: 02
<4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
<4> Vendor: PLEXTOR Model: CD-ROM PX-8XCS Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
<4> Vendor: TEAC Model: CD-R55S Rev: 1.0N
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
<6>ncr53c875-0-<0,0>: tagged command queue depth set to 4
<4>scsi : detected 2 SCSI cdroms 1 SCSI disk total.
<6>ncr53c875-0-<3,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
<6>Uniform CDROM driver Revision: 2.52
<6>ncr53c875-0-<4,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
<6>ncr53c875-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
<4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 8467200 [4134 MB] [4.1 GB]
<6>PPP: version 2.3.3 (demand dialling)
<6>TCP compression code copyright 1989 Regents of the University of California
<6>PPP line discipline registered.
<4>Partition check:
<4> sda: sda1 sda2 sda3 sda4
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 60k freed
<6>Adding Swap: 120480k swap-space (priority -1)
Kernel logging (proc) stopped.
Kernel log daemon terminating.
