Keith,
Sent the
following e-mail to Simon Wells the other day following your putting details of
his biodiesel mixer on the web but have not heard back from him. Would
appreciate yours, Steve Spences, or anyone else who is
knowledgeable comments. Thanks.
B.r., David
Hi Simon,
Had
a look at your biodiesel mixer pictures and read the article when Keith put in
on the net the other day. Believe you have done a good job keeping it simple and
that it should work well. One question though. I see you are using a 1500
rpm motor and that you state the blade turns at about 800 or say 750 rpm
using 2:1 reduction pulleys. By my reckoning this equals about 13 r p
second which seems very fast to me. I would have thought about 1/2 that would
have been more than plenty (420 rpm = 7 revs per second). Interested in your
thoughts on the matter and why you have chosen this higher speed. At present
have not yet made bio-diesel so have no practical experience but intend to
shortly. Have I missed something or is there something I cant yet
see.
B.r., David Reid (New Zealand)
Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html To unsubscribe, send an email to: [EMAIL PROTECTED] |
- Re: [biofuel] Boidiesel mixer DAVID REID
- Re: [biofuel] Boidiesel mixer Steve Spence
- Re: [biofuel] Boidiesel mixer Keith Addison
- Re: [biofuel] Boidiesel mixer David Teal
- [biofuel] Re: Boidiesel mixer Keith Addison
- Re: [biofuel] Re: Boidiesel mixer David Teal