I used the Veggieavenger forum to upload the design notes for the processors I've been building. I've put together a few of these now and they cost me about $120-$150, about one and a half hours fo work, and use off-the-shelf parts from hardware stores and two or so catalog places (plastics place for carboys and Harbor Freight or Northern Tool for pump. They take no welding or soldering (you shouldn't use copper for biodiesel anyway) and no skills other than threading things together using thread tape and tightening things with a pipe wrench and a pair of channellock pliers. ANd, they're safer than plastic conicals and do as good of a job as most of the conicals I've used
Here it is, more (cheap wash tank) plans and photos coming eventually. http://www.veggieavenger.com/avengerboard/viewtopic.php?p=8 33#833 mark ------------------------ Yahoo! Groups Sponsor ---------------------~--> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada. http://www.c1tracking.com/l.asp?cid=5511 http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/FGYolB/TM ---------------------------------------------------------------------~-> Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html Biofuels list archives: http://archive.nnytech.net/index.php?list=biofuel Please do NOT send Unsubscribe messages to the list address. To unsubscribe, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
