>Has anyone tried or had luck burning WVO with a wick? Yes.
>On another board I read that a guy built a burner based around a >wick method. So did we. It's said, as with biodiesel, that it won't travel up a wick, but it depends on the wick. The wick should be loose, not tightly wound, thick (about 1cm) with plenty of room in whatever it's fitted into (a loose fit), and the burning bit has to be less than about 3cm maximum from the fuel level. Todd Swearingen previously suggested a donut-shaped arrangement around the burning wick(s) to get the fuel level right. You'd need a few such wicks going for an effective stove, maybe six or eight. Adjusting them all, and lowering them to extinguish the stove, are problems to be solved, but shouldn't be too hard. Best Keith >Thanks Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html Biofuels list archives: http://infoarchive.net/sgroup/biofuel/ Please do NOT send Unsubscribe messages to the list address. To unsubscribe, send an email to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/biofuel/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/