Yes most likely it is the head gasket nut in a worse case scenario it could be a warped head or a cracked head/ Good luck Dave
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of alex burton Sent: Monday, November 29, 2004 11:08 PM To: [EMAIL PROTECTED] Subject: [Biofuel] old diesel engine Hello All this is my first ever message ( Please forgive my spelling.) I have so far only used the single stage method but will in time start the two stage method. i have limited knowlage about diesel engines my first question is rebuilding a diesel engine much different to rebuilding a petrol engine ? the reason i ask is i have been offered a old diesel for testing which is said to have a blown head gasket (oil is getting into the coolant would this be a the head gasket or some other gasket or seal??????????.) regards Alex [ememail.gif] _______________________________________________ Biofuel mailing list [EMAIL PROTECTED] http://wwia.org/mailman/listinfo.cgi/biofuel Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html Biofuel archives at Infoarchive.net (searchable): http://infoarchive.net/sgroup/biofuel/ -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.289 / Virus Database: 265.4.3 - Release Date: 11/26/2004 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.289 / Virus Database: 265.4.3 - Release Date: 11/26/2004 _______________________________________________ Biofuel mailing list [EMAIL PROTECTED] http://wwia.org/mailman/listinfo.cgi/biofuel Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html Biofuel archives at Infoarchive.net (searchable): http://infoarchive.net/sgroup/biofuel/
