Hello Pannir P.V,
I am very interested in what you had written in your mail. Please
send the relevant information or data about the research in your
univ.
Please don't, Pan - if you have such information available for
emailing, please send it to the list and not direct to Alampratap, or
it will end up only on his hard disk and yours. It's of interest to
everyone and should be shared with the whole list if possible, and
then it will also be in the archives for future seekers to find there.
I have tried to check IIT Delhi's website, but can't find any
information. Send some link if you can.
No, please, as above - send it to the list.
Basically i want to run a simple diesel engine on gobar gas without
much investment and am looking for the best way to do it. I will be
grateful for your help.
We're all here to be helped AND to help each other Alampratap. The
list is for sharing, not just for receiving.
Best wishes
Keith Addison
Journey to Forever
KYOTO Pref., Japan
http://journeytoforever.org/
Regards
Alampratap Singh Tiwana
--- "Pannir P.V" <[EMAIL PROTECTED]> wrote:
From: "Pannir P.V" <[EMAIL PROTECTED]>
Date: Wed, 9 Feb 2005 08:47:37 -0200
To: [EMAIL PROTECTED]
Subject: Re: [Biofuel] How to run diesel engine on gobar gas?
Helow A..Sing
Our university here in Brasil has done some work on
modification of the very high compression of diesel engine as
master theses and very good work is being done at IIT delhi , IIndia
.You can run the engine with the mixture of gas upto 40 porcent
with bioD without modification .
Because of the very lower cost of the gasoline auto engine
with generator , which can very easiliy adopted to use alcohol
,gasoline , LPG, biogas , butane gas , a simple flexible power
generatio is very interesting way to make possible small scale poer
production.This combined with thermal recovery os engine waste gas
for heating and cooling make the system highly compettive, more
sustainabale with centralised , costlier electric energy
distributed in rural reas
Feel free to have mor information.
sd
Pannirselvam
On Tue, 8 Feb 2005 20:11:11 -0800 (PST), alampratap singh tiwana
<[EMAIL PROTECTED]> wrote:
> Can anybody please give full technical information on how to run an
> ordinary 4-cylinder diesel engine on gas straight from the gobar gas
> pit? I need full specifications regarding the fixture of any kit on
> the engine. Also compressing or processing the gas in any way before
> being fed into the engine is not a viable option in my circumstances.
> If anybody has some ideas, please reply so.
>
> Regards
>
> Alampratap Singh Tiwana
--
Pagandai V Pannirselvam
Universidade Federal do Rio Grande do Norte - UFRN
Departamento de Engenharia Química - DEQ
Centro de Tecnologia - CT
Programa de Pós Graduação em Engenharia Química - PPGEQ
Grupo de Pesquisa em Engenharia de Custos - GPEC
Av. Senador Salgado Filho, Campus Universitário
CEP 59.072-970 , Natal/RN - Brasil
Residence :
Av Odilon gome de lima, 2951,
Q6/Bl.G/Apt 102
Capim Macio
EP 59.078-400 , Natal/RN - Brasil
Telefone(fax) ( 84 ) 215-3770 Ramal20
2171557
Telefone(fax) ( 84 ) 215-3770 Ramal20
2171557
_______________________________________________
Biofuel mailing list
[EMAIL PROTECTED]
http://wwia.org/mailman/listinfo.cgi/biofuel
Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html
Biofuel archives at Infoarchive.net (searchable):
http://infoarchive.net/sgroup/biofuel/
