Hi!You should not reduce the suction side ,only the discharge,ohtervise the
pump will cavitate.The 5 ' rise should be ok but try to limit you're elbowes
specially right after the discharge!
----- Original Message -----
From: Larry Foran<mailto:[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]>
Sent: Tuesday, May 10, 2005 2:53 PM
Subject: [Biofuel] Bio Diesel Pump
Before I ask my question, I did search the archives but did not find
any information regarding my "specific question".
I am building a BD processor - based on the appelseed design - and I
intend to use a Northern Industiral Clear water Pump - 760GPH, 1 1/2in
ports. I would like to neck the ports down to 3/4 in, but not being a
plumber or fluid mechanic, I wanted to know if this would case and
pressure problem.
I will be processing 40gallons (US). The static head will be approx 5ft.
Any help would be appreciated.
tks,
Larry
_______________________________________________
Biofuel mailing list
[EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]>
http://wwia.org/mailman/listinfo/biofuel<http://wwia.org/mailman/listinfo/biofuel>
Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html<http://journeytoforever.org/biofuel.html>
Biofuel archives at Infoarchive.net (searchable):
http://infoarchive.net/sgroup/biofuel/<http://infoarchive.net/sgroup/biofuel/>
_______________________________________________
Biofuel mailing list
[EMAIL PROTECTED]
http://wwia.org/mailman/listinfo/biofuel
Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html
Biofuel archives at Infoarchive.net (searchable):
http://infoarchive.net/sgroup/biofuel/
