Author: loos Date: Thu Apr 23 19:50:22 2015 New Revision: 281900 URL: https://svnweb.freebsd.org/changeset/base/281900
Log: Now that we have an U-Boot for RPI2, do not use the static DTB compiled into the kernel, which is used mostly on early development stages. On RPI(2) the DTB is loaded and modified by firmware and then handed to kernel via U-Boot and ubldr. The RPI firmware adds (or modify) a few valuable data to the in memory DTB, like: - System memory; - Ethernet MAC address; - framebuffer settings; - Board serial and revision; - clock-frequency for most of devices. Modified: head/sys/arm/conf/RPI2 Modified: head/sys/arm/conf/RPI2 ============================================================================== --- head/sys/arm/conf/RPI2 Thu Apr 23 18:36:36 2015 (r281899) +++ head/sys/arm/conf/RPI2 Thu Apr 23 19:50:22 2015 (r281900) @@ -137,6 +137,6 @@ device bcm2835_spi options FDT # Configure using FDT/DTB data # Note: DTB is normally loaded and modified by RPi boot loader, then # handed to kernel via U-Boot and ubldr. -options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=rpi2.dts +#options FDT_DTB_STATIC +#makeoptions FDT_DTS_FILE=rpi2.dts makeoptions MODULES_EXTRA=dtb/rpi _______________________________________________ svn-src-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
