Ian Lepore wrote this message on Mon, Jul 06, 2015 at 14:11 -0600: > On Mon, 2015-07-06 at 19:33 +0000, Neel Natu wrote: > > Author: neel > > Date: Mon Jul 6 19:33:29 2015 > > New Revision: 285217 > > URL: https://svnweb.freebsd.org/changeset/base/285217 > > > > Log: > > Always assert DCD and DSR in bhyve's uart emulation. > > > > The /etc/ttys entry for a serial console in FreeBSD/x86 is as follows: > > ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure > > > > The initial terminal type passed to getty(8) is "3wire" which sets the > > CLOCAL flag. However reset(1) clears this flag and any programs that try > > to open the terminal will hang waiting for DCD to be asserted. > > > > Fix this by always asserting DCD and DSR in the emulated uart. > > > > The following discussion on virtualization@ has more details: > > > > https://lists.freebsd.org/pipermail/freebsd-virtualization/2015-June/003666.html > > > > Reported by: jmg > > Discussed with: grehan > > This seems like a wrong fix. A real 3-wire serial console doesn't have > DCD and DSR wired on. Why isn't the right fix here having the user with > this problem to do "stty -f /dev/ttyu0.lock clocal", maybe in rc.local? > > Hmmm, or maybe it would be right for getty to do the equivelent when it > sees a 3wire type?
This seems more sane to me... Ok, so I just tested on real hardware, and something is wrong w/ FreeBSD's behavior... Could this be a change between 10 and HEAD? One a real machine (I manually added 3wire from HEAD so /etc/ttys is exactly the same between the two): # uname -a FreeBSD 10.1-STABLE FreeBSD 10.1-STABLE #102: Mon Jun 22 18:28:28 PDT 2015 j...@carbon.funkthat.com:/a/home/jmg/consulting/netflix/new_sys/amd64/compile/bhgdb amd64 # echo $TERM vt100 # stty -a | grep clocal cflags: cread cs8 -parenb -parodd -hupcl clocal -cstopb -crtscts -dsrflow # reset Erase is backspace. # stty -a | grep clocal cflags: cread cs8 -parenb -parodd -hupcl clocal -cstopb -crtscts -dsrflow and under bhyve: # uname -a FreeBSD 11.0-CURRENT FreeBSD 11.0-CURRENT #11 r284880M: Fri Jul 3 14:14:49 PDT 2015 j...@carbon.funkthat.com:/a/obj/a/home/jmg/FreeBSD.svn/HEAD/sys/IPSEC amd64 # echo $TERM vt100 # stty -a | grep clocal cflags: cread cs8 -parenb -parodd hupcl clocal -cstopb -crtscts -dsrflow # reset <screen clears here, unlike real hardware> # stty -a | grep clocal cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow I check and both .init and .lock have the same settings... reset -S both return the same termcap entry... -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not." _______________________________________________ svn-src-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"