Author: bde Date: Tue Aug 23 19:50:16 2016 New Revision: 304699 URL: https://svnweb.freebsd.org/changeset/base/304699
Log: Fix key delay and repeat, part 1. kbdcontrol -r fast is documented to give a non-emulated atkbd's fastest rate of 250.34, but is misimplemented to request this as 0.0. ukbd supports many nonstandard rates, although it is currently too inaccurate by a factor of several hundred for non-huge nonstandard rates to be useful. It mapped 0.0 to 200.0. A repeat delay of 0 means a rate of infinity which is quite fast, but physical constraints limit this to a few MHz and the inaccuracies made it almost usable. Convert 0.0 to the documented 250.34. Also convert negative args and small args to the 250.34 minimal ones, like atkbd does. This is for KDSETREPEAT -- the 2 versions of the deprecated KDSETRAD have bounds checking. Keep not doing any bounds checking or conversions for upper limits since nonstandard large delays are useful for testing. The inaccuracies are dependent on HZ and the timeout implementation. With the old timeout implementation and HZ = 1000, 200.0 probably worked better to emulate 250.34 than 250.34 itself. HZ = 100 gives roundoff errors that accidentally reduce the inaaccuracies, and event timers reduce the inaccuracies even more, so 200.0 was giving more like itself (perhaps 215.15 on average but sometimes close to 10 msec repeat which is noticebly too fast). This commit makes 0.0 noticeably too slow, like 250.34 always was. Modified: head/sys/dev/usb/input/ukbd.c Modified: head/sys/dev/usb/input/ukbd.c ============================================================================== --- head/sys/dev/usb/input/ukbd.c Tue Aug 23 19:41:49 2016 (r304698) +++ head/sys/dev/usb/input/ukbd.c Tue Aug 23 19:50:16 2016 (r304699) @@ -1887,17 +1887,14 @@ ukbd_ioctl_locked(keyboard_t *kbd, u_lon if (!KBD_HAS_DEVICE(kbd)) { return (0); } - if (((int *)arg)[1] < 0) { - return (EINVAL); - } - if (((int *)arg)[0] < 0) { - return (EINVAL); - } - if (((int *)arg)[0] < 200) /* fastest possible value */ - kbd->kb_delay1 = 200; - else - kbd->kb_delay1 = ((int *)arg)[0]; - kbd->kb_delay2 = ((int *)arg)[1]; + /* + * Convert negative, zero and tiny args to the same limits + * as atkbd. We could support delays of 1 msec, but + * anything much shorter than the shortest atkbd value + * of 250.34 is almost unusable as well as incompatible. + */ + kbd->kb_delay1 = imax(((int *)arg)[0], 250); + kbd->kb_delay2 = imax(((int *)arg)[1], 34); return (0); #if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ _______________________________________________ svn-src-all@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"