Author: adrian Date: Thu Feb 1 21:58:52 2018 New Revision: 328754 URL: https://svnweb.freebsd.org/changeset/base/328754
Log: [atheros] Fix-up the base address stuff after I did a drive-by with the calibration data location. The old way required the data to be present really early and copied it from memory mapped NOR flash; this only worked during kernel boot but not for ath/ath_hal modules. Tested: * AR9331, Carambola2, ath/hal modules. Modified: head/sys/mips/conf/AR933X_BASE.hints head/sys/mips/conf/std.AR933X Modified: head/sys/mips/conf/AR933X_BASE.hints ============================================================================== --- head/sys/mips/conf/AR933X_BASE.hints Thu Feb 1 21:41:15 2018 (r328753) +++ head/sys/mips/conf/AR933X_BASE.hints Thu Feb 1 21:58:52 2018 (r328754) @@ -9,6 +9,10 @@ hint.apb.0.at="nexus0" hint.apb.0.irq=4 +# ART calibration data mapping device +hint.ar71xx_caldata.0.at="nexus0" +hint.ar71xx_caldata.0.order=0 + # uart0 hint.uart.0.at="apb0" # NB: This isn't an ns8250 UART @@ -39,9 +43,13 @@ hint.ath.0.msize=0x20000 hint.ath.0.irq=0 hint.ath.0.vendor_id=0x168c hint.ath.0.device_id=0x0035 -# Set this to define where the ath calibration data -# should be fetched from in physical memory. -# hint.ath.0.eepromaddr=0x1fff1000 + +# Where the ART is - last 64k in the first 8MB of flash +#hint.ar71xx_caldata.0.map.0.ath_fixup_addr=0x1fff0000 +#hint.ar71xx_caldata.0.map.0.ath_fixup_size=16384 + +# And now tell the ath(4) driver where to look! +#hint.ath.0.eeprom_firmware="ar71xx_caldata.0.map.0.eeprom_firmware" # SPI flash hint.spi.0.at="nexus0" Modified: head/sys/mips/conf/std.AR933X ============================================================================== --- head/sys/mips/conf/std.AR933X Thu Feb 1 21:41:15 2018 (r328753) +++ head/sys/mips/conf/std.AR933X Thu Feb 1 21:58:52 2018 (r328754) @@ -62,6 +62,9 @@ makeoptions MODULES_OVERRIDE+="hwpmc_mips24k" option AH_SUPPORT_AR9330 # Chipset support option ATH_EEPROM_FIRMWARE # Use EEPROM from flash +# Support EEPROM caldata in AHB devices +options ATH_EEPROM_FIRMWARE + device usb device ehci _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "[email protected]"
