Author: imp
Date: Mon Dec 16 21:34:51 2019
New Revision: 355822
URL: https://svnweb.freebsd.org/changeset/base/355822
Log:
We'll never have multiple slots a cardbus bridge. So, replace exca
array with a singleton.
Also, pccbb isa attachment is never going to happen, do disconnect it from the
build (will delete this in future commit). It would need to be updated as
well,
but since this code is effectively dead code, remove it from the build
instead.
Modified:
head/sys/conf/files
head/sys/dev/pccbb/pccbb.c
head/sys/dev/pccbb/pccbb_pci.c
head/sys/dev/pccbb/pccbbvar.h
head/sys/modules/cbb/Makefile
Modified: head/sys/conf/files
==============================================================================
--- head/sys/conf/files Mon Dec 16 21:06:24 2019 (r355821)
+++ head/sys/conf/files Mon Dec 16 21:34:51 2019 (r355822)
@@ -2552,7 +2552,6 @@ dev/pccard/pccard_cis_quirks.c optional pccard
dev/pccard/pccard_device.c optional pccard
dev/pccard/power_if.m standard
dev/pccbb/pccbb.c optional cbb
-dev/pccbb/pccbb_isa.c optional cbb isa
dev/pccbb/pccbb_pci.c optional cbb pci
dev/pcf/pcf.c optional pcf
dev/pci/fixup_pci.c optional pci
Modified: head/sys/dev/pccbb/pccbb.c
==============================================================================
--- head/sys/dev/pccbb/pccbb.c Mon Dec 16 21:06:24 2019 (r355821)
+++ head/sys/dev/pccbb/pccbb.c Mon Dec 16 21:34:51 2019 (r355822)
@@ -253,9 +253,9 @@ cbb_disable_func_intr(struct cbb_softc *sc)
#if 0
uint8_t reg;
- reg = (exca_getb(&sc->exca[0], EXCA_INTR) & ~EXCA_INTR_IRQ_MASK) |
+ reg = (exca_getb(&sc->exca, EXCA_INTR) & ~EXCA_INTR_IRQ_MASK) |
EXCA_INTR_IRQ_RESERVED1;
- exca_putb(&sc->exca[0], EXCA_INTR, reg);
+ exca_putb(&sc->exca, EXCA_INTR, reg);
#endif
}
@@ -271,11 +271,9 @@ cbb_enable_func_intr(struct cbb_softc *sc)
{
uint8_t reg;
- reg = (exca_getb(&sc->exca[0], EXCA_INTR) & ~EXCA_INTR_IRQ_MASK) |
+ reg = (exca_getb(&sc->exca, EXCA_INTR) & ~EXCA_INTR_IRQ_MASK) |
EXCA_INTR_IRQ_NONE;
- exca_putb(&sc->exca[0], EXCA_INTR, reg);
- PCI_MASK_CONFIG(sc->dev, CBBR_BRIDGECTRL,
- & ~CBBM_BRIDGECTRL_INTR_IREQ_ISA_EN, 2);
+ exca_putb(&sc->exca, EXCA_INTR, reg);
}
int
@@ -322,7 +320,7 @@ cbb_detach(device_t brdev)
cbb_set(sc, CBB_SOCKET_MASK, 0);
/* reset 16-bit pcmcia bus */
- exca_clrb(&sc->exca[0], EXCA_INTR, EXCA_INTR_RESET);
+ exca_clrb(&sc->exca, EXCA_INTR, EXCA_INTR_RESET);
/* turn off power */
cbb_power(brdev, CARD_OFF);
@@ -442,7 +440,7 @@ cbb_child_detached(device_t brdev, device_t child)
struct cbb_softc *sc = device_get_softc(brdev);
/* I'm not sure we even need this */
- if (child != sc->cbdev && child != sc->exca[0].pccarddev)
+ if (child != sc->cbdev && child != sc->exca.pccarddev)
device_printf(brdev, "Unknown child detached: %s\n",
device_get_nameunit(child));
}
@@ -549,9 +547,9 @@ cbb_insert(struct cbb_softc *sc)
sockevent, sockstate));
if (sockstate & CBB_STATE_R2_CARD) {
- if (device_is_attached(sc->exca[0].pccarddev)) {
+ if (device_is_attached(sc->exca.pccarddev)) {
sc->flags |= CBB_16BIT_CARD;
- exca_insert(&sc->exca[0]);
+ exca_insert(&sc->exca);
} else {
device_printf(sc->dev,
"16-bit card inserted, but no pccard bus.\n");
@@ -578,7 +576,7 @@ cbb_removal(struct cbb_softc *sc)
{
sc->cardok = 0;
if (sc->flags & CBB_16BIT_CARD) {
- exca_removal(&sc->exca[0]);
+ exca_removal(&sc->exca);
} else {
if (device_is_attached(sc->cbdev))
CARD_DETACH_CARD(sc->cbdev);
@@ -708,8 +706,8 @@ cbb_o2micro_power_hack(struct cbb_softc *sc)
* keyboard controller's interrupts being suppressed occurred when
* we did this.
*/
- reg = exca_getb(&sc->exca[0], EXCA_INTR);
- exca_putb(&sc->exca[0], EXCA_INTR, (reg & 0xf0) | 1);
+ reg = exca_getb(&sc->exca, EXCA_INTR);
+ exca_putb(&sc->exca, EXCA_INTR, (reg & 0xf0) | 1);
return (reg);
}
@@ -721,7 +719,7 @@ cbb_o2micro_power_hack(struct cbb_softc *sc)
static void
cbb_o2micro_power_hack2(struct cbb_softc *sc, uint8_t reg)
{
- exca_putb(&sc->exca[0], EXCA_INTR, reg);
+ exca_putb(&sc->exca, EXCA_INTR, reg);
}
int
@@ -921,7 +919,7 @@ cbb_do_power(device_t brdev)
uint32_t status;
/* Don't enable OE (output enable) until power stable */
- exca_clrb(&sc->exca[0], EXCA_PWRCTL, EXCA_PWRCTL_OE);
+ exca_clrb(&sc->exca, EXCA_PWRCTL, EXCA_PWRCTL_OE);
voltage = cbb_detect_voltage(brdev);
curpwr = cbb_current_voltage(brdev);
@@ -1312,7 +1310,7 @@ cbb_pcic_power_enable_socket(device_t brdev, device_t
err = cbb_do_power(brdev);
if (err)
return (err);
- exca_reset(&sc->exca[0], child);
+ exca_reset(&sc->exca, child);
return (0);
}
@@ -1325,18 +1323,18 @@ cbb_pcic_power_disable_socket(device_t brdev, device_t
DPRINTF(("cbb_pcic_socket_disable\n"));
/* Turn off the card's interrupt and leave it in reset, wait 10ms */
- exca_putb(&sc->exca[0], EXCA_INTR, 0);
+ exca_putb(&sc->exca, EXCA_INTR, 0);
pause("cbbP1", hz / 100);
/* power down the socket */
cbb_power(brdev, CARD_OFF);
- exca_putb(&sc->exca[0], EXCA_PWRCTL, 0);
+ exca_putb(&sc->exca, EXCA_PWRCTL, 0);
/* wait 300ms until power fails (Tpf). */
pause("cbbP2", hz * 300 / 1000);
/* enable CSC interrupts */
- exca_putb(&sc->exca[0], EXCA_INTR, EXCA_INTR_ENABLE);
+ exca_putb(&sc->exca, EXCA_INTR, EXCA_INTR_ENABLE);
return (0);
}
@@ -1370,7 +1368,7 @@ cbb_pcic_activate_resource(device_t brdev, device_t ch
struct cbb_softc *sc = device_get_softc(brdev);
int error;
- error = exca_activate_resource(&sc->exca[0], child, type, rid, res);
+ error = exca_activate_resource(&sc->exca, child, type, rid, res);
if (error == 0)
cbb_activate_window(brdev, type);
return (error);
@@ -1381,7 +1379,7 @@ cbb_pcic_deactivate_resource(device_t brdev, device_t
int rid, struct resource *res)
{
struct cbb_softc *sc = device_get_softc(brdev);
- return (exca_deactivate_resource(&sc->exca[0], child, type, rid, res));
+ return (exca_deactivate_resource(&sc->exca, child, type, rid, res));
}
static struct resource *
@@ -1476,7 +1474,7 @@ cbb_pcic_set_res_flags(device_t brdev, device_t child,
"set_res_flags: specified rid not found\n");
return (ENOENT);
}
- return (exca_mem_set_flags(&sc->exca[0], res, flags));
+ return (exca_mem_set_flags(&sc->exca, res, flags));
}
int
@@ -1492,7 +1490,7 @@ cbb_pcic_set_memory_offset(device_t brdev, device_t ch
"set_memory_offset: specified rid not found\n");
return (ENOENT);
}
- return (exca_mem_set_offset(&sc->exca[0], res, cardaddr, deltap));
+ return (exca_mem_set_offset(&sc->exca, res, cardaddr, deltap));
}
/************************************************************************/
Modified: head/sys/dev/pccbb/pccbb_pci.c
==============================================================================
--- head/sys/dev/pccbb/pccbb_pci.c Mon Dec 16 21:06:24 2019
(r355821)
+++ head/sys/dev/pccbb/pccbb_pci.c Mon Dec 16 21:34:51 2019
(r355822)
@@ -294,7 +294,6 @@ cbb_pci_attach(device_t brdev)
sc->chipset = cbb_chipset(pci_get_devid(brdev), NULL);
sc->dev = brdev;
sc->cbdev = NULL;
- sc->exca[0].pccarddev = NULL;
sc->domain = pci_get_domain(brdev);
sc->pribus = pcib_get_bus(parent);
#if defined(NEW_PCIB) && defined(PCI_RES_BUS)
@@ -320,9 +319,9 @@ cbb_pci_attach(device_t brdev)
sc->bst = rman_get_bustag(sc->base_res);
sc->bsh = rman_get_bushandle(sc->base_res);
- exca_init(&sc->exca[0], brdev, sc->bst, sc->bsh, CBB_EXCA_OFFSET);
- sc->exca[0].flags |= EXCA_HAS_MEMREG_WIN;
- sc->exca[0].chipset = EXCA_CARDBUS;
+ exca_init(&sc->exca, brdev, sc->bst, sc->bsh, CBB_EXCA_OFFSET);
+ sc->exca.flags |= EXCA_HAS_MEMREG_WIN;
+ sc->exca.chipset = EXCA_CARDBUS;
sc->chipinit = cbb_chipinit;
sc->chipinit(sc);
@@ -381,10 +380,10 @@ cbb_pci_attach(device_t brdev)
else if (device_probe_and_attach(sc->cbdev) != 0)
DEVPRINTF((brdev, "WARNING: cannot attach cardbus bus!\n"));
- sc->exca[0].pccarddev = device_add_child(brdev, "pccard", -1);
- if (sc->exca[0].pccarddev == NULL)
+ sc->exca.pccarddev = device_add_child(brdev, "pccard", -1);
+ if (sc->exca.pccarddev == NULL)
DEVPRINTF((brdev, "WARNING: cannot add pccard bus.\n"));
- else if (device_probe_and_attach(sc->exca[0].pccarddev) != 0)
+ else if (device_probe_and_attach(sc->exca.pccarddev) != 0)
DEVPRINTF((brdev, "WARNING: cannot attach pccard bus.\n"));
/* Map and establish the interrupt. */
@@ -403,7 +402,7 @@ cbb_pci_attach(device_t brdev)
}
/* reset 16-bit pcmcia bus */
- exca_clrb(&sc->exca[0], EXCA_INTR, EXCA_INTR_RESET);
+ exca_clrb(&sc->exca, EXCA_INTR, EXCA_INTR_RESET);
/* turn off power */
cbb_power(brdev, CARD_OFF);
@@ -580,10 +579,10 @@ cbb_chipinit(struct cbb_softc *sc)
* still be correctly generated if NO ISA IRQ is
* selected (ExCA regs 03h or 05h are cleared).
*/
- reg = exca_getb(&sc->exca[0], EXCA_O2MICRO_CTRL_C);
+ reg = exca_getb(&sc->exca, EXCA_O2MICRO_CTRL_C);
reg = (reg & 0x0f) |
EXCA_O2CC_IREQ_INTC | EXCA_O2CC_STSCHG_INTC;
- exca_putb(&sc->exca[0], EXCA_O2MICRO_CTRL_C, reg);
+ exca_putb(&sc->exca, EXCA_O2MICRO_CTRL_C, reg);
break;
case CB_TOPIC97:
/*
@@ -601,7 +600,7 @@ cbb_chipinit(struct cbb_softc *sc)
* ToPIC97, 100
* Need to assert support for low voltage cards
*/
- exca_setb(&sc->exca[0], EXCA_TOPIC97_CTRL,
+ exca_setb(&sc->exca, EXCA_TOPIC97_CTRL,
EXCA_TOPIC97_CTRL_LV_MASK);
goto topic_common;
case CB_TOPIC95:
@@ -644,8 +643,8 @@ cbb_chipinit(struct cbb_softc *sc)
* INTR_ENABLE and the other is to set CSC to 0. Since both
* methods are mutually compatible, we do both.
*/
- exca_putb(&sc->exca[0], EXCA_INTR, EXCA_INTR_ENABLE);
- exca_putb(&sc->exca[0], EXCA_CSC_INTR, 0);
+ exca_putb(&sc->exca, EXCA_INTR, EXCA_INTR_ENABLE);
+ exca_putb(&sc->exca, EXCA_CSC_INTR, 0);
cbb_disable_func_intr(sc);
@@ -684,7 +683,7 @@ cbb_pci_shutdown(device_t brdev)
* down the socket.
*/
PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, |CBBM_BRIDGECTRL_RESET, 2);
- exca_clrb(&sc->exca[0], EXCA_INTR, EXCA_INTR_RESET);
+ exca_clrb(&sc->exca, EXCA_INTR, EXCA_INTR_RESET);
cbb_set(sc, CBB_SOCKET_MASK, 0);
cbb_set(sc, CBB_SOCKET_EVENT, 0xffffffff);
cbb_power(brdev, CARD_OFF);
@@ -693,7 +692,7 @@ cbb_pci_shutdown(device_t brdev)
* For paranoia, turn off all address decoding. Really not needed,
* it seems, but it can't hurt
*/
- exca_putb(&sc->exca[0], EXCA_ADDRWIN_ENABLE, 0);
+ exca_putb(&sc->exca, EXCA_ADDRWIN_ENABLE, 0);
pci_write_config(brdev, CBBR_MEMBASE0, 0, 4);
pci_write_config(brdev, CBBR_MEMLIMIT0, 0, 4);
pci_write_config(brdev, CBBR_MEMBASE1, 0, 4);
@@ -733,7 +732,7 @@ cbb_pci_filt(void *arg)
* in one place and a double wakeup would be benign there.
*/
if (sc->flags & CBB_16BIT_CARD) {
- csc = exca_getb(&sc->exca[0], EXCA_CSC);
+ csc = exca_getb(&sc->exca, EXCA_CSC);
if (csc & EXCA_CSC_READY) {
atomic_add_int(&sc->powerintr, 1);
wakeup((void *)&sc->powerintr);
Modified: head/sys/dev/pccbb/pccbbvar.h
==============================================================================
--- head/sys/dev/pccbb/pccbbvar.h Mon Dec 16 21:06:24 2019
(r355821)
+++ head/sys/dev/pccbb/pccbbvar.h Mon Dec 16 21:34:51 2019
(r355822)
@@ -53,11 +53,10 @@ struct cbb_reslist {
};
#define CBB_AUTO_OPEN_SMALLHOLE 0x100
-#define CBB_NSLOTS 4
struct cbb_softc {
device_t dev;
- struct exca_softc exca[CBB_NSLOTS];
+ struct exca_softc exca;
struct resource *base_res;
struct resource *irq_res;
void *intrhand;
Modified: head/sys/modules/cbb/Makefile
==============================================================================
--- head/sys/modules/cbb/Makefile Mon Dec 16 21:06:24 2019
(r355821)
+++ head/sys/modules/cbb/Makefile Mon Dec 16 21:34:51 2019
(r355822)
@@ -3,8 +3,8 @@
.PATH: ${SRCTOP}/sys/dev/pccbb
KMOD= cbb
-SRCS= pccbb.c pccbb_isa.c pccbb_pci.c \
- device_if.h bus_if.h power_if.h card_if.h isa_if.h pci_if.h pcib_if.h
+SRCS= pccbb.c pccbb_pci.c \
+ device_if.h bus_if.h power_if.h card_if.h pci_if.h pcib_if.h
.if ${MACHINE_ARCH} == "i386" || ${MACHINE_ARCH} == "amd64"
CFLAGS += -DNEW_PCIB
_______________________________________________
svn-src-all@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
