Author: adrian Date: Tue Dec 17 00:00:03 2019 New Revision: 355829 URL: https://svnweb.freebsd.org/changeset/base/355829
Log: [atheros] [mips] Add the GPIO driver (back) to the TL-WDR3600/TL-WDR4300 kernel. So it turns out that sometime in the past I removed the GPIO bits here and was going to move it into a module in order to save a little space. However, it turns out that was a mistake on this particular AP - it uses a pair of GPIO lines to control the two receive LNAs on the 2GHz radio and without them enabled the radio is a LOT DEAF. With this re-introduced (and some replacement userland tools to save space, *cough* cpio/libarchive) I can actually use these chipsets again as a 2G station. Without the LNA the AP was seeing a per-radio RSSI upstairs here of around 3-5dB, with the LNA on it's around 15dB, more than enough to actually use wifi upstairs and also in line with the other Atheros / Intel devices I have up here. Big oopsie to Adrian. Big, big oopsie. Modified: head/sys/mips/conf/TL-WDR4300 Modified: head/sys/mips/conf/TL-WDR4300 ============================================================================== --- head/sys/mips/conf/TL-WDR4300 Mon Dec 16 23:55:30 2019 (r355828) +++ head/sys/mips/conf/TL-WDR4300 Tue Dec 17 00:00:03 2019 (r355829) @@ -50,5 +50,12 @@ options AR71XX_ATH_EEPROM device firmware # Used by the above options ATH_EEPROM_FIRMWARE +options ATH_DEBUG_ALQ + # Boot off of the rootfs, as defined in the geom_map setup. options ROOTDEVNAME=\"ufs:map/rootfs.uzip\" + +# This is required for the 2GHz LNAs on the AR9340 SoC. +# Without this the 2GHz radio is Quite Deaf. +device gpio +device gpioled _______________________________________________ svn-src-all@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
