Author: rwatson
Date: Sat Aug 25 08:31:21 2012
New Revision: 239671
URL: http://svn.freebsd.org/changeset/base/239671

Log:
  Add preliminary support for the SRI International / University of Cambridge
  Bluespec Extensible RISC Implementation (BERI) processor.  BERI is a 64-bit
  MIPS ISA soft CPU core that can be synthesised to Altera and Xilinx FPGAs,
  and is being used for CPU and OS research at several institutions.
  
  Sponsored by:   DARPA, AFRL

Added:
  head/sys/mips/beri/
  head/sys/mips/beri/beri_machdep.c   (contents, props changed)
  head/sys/mips/beri/files.beri   (contents, props changed)
  head/sys/mips/beri/std.beri   (contents, props changed)
Modified:
  head/sys/conf/options.mips
  head/sys/mips/mips/machdep.c

Modified: head/sys/conf/options.mips
==============================================================================
--- head/sys/conf/options.mips  Sat Aug 25 08:09:37 2012        (r239670)
+++ head/sys/conf/options.mips  Sat Aug 25 08:31:21 2012        (r239671)
@@ -37,6 +37,7 @@ CPU_SB1       opt_global.h
 CPU_CNMIPS     opt_global.h
 CPU_RMI                opt_global.h
 CPU_NLM                opt_global.h
+CPU_BERI       opt_global.h
 
 COMPAT_FREEBSD32       opt_compat.h
 

Added: head/sys/mips/beri/beri_machdep.c
==============================================================================
--- /dev/null   00:00:00 1970   (empty, because file is newly added)
+++ head/sys/mips/beri/beri_machdep.c   Sat Aug 25 08:31:21 2012        
(r239671)
@@ -0,0 +1,165 @@
+/*-
+ * Copyright (c) 2006 Wojciech A. Koszek <wkos...@freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include "opt_ddb.h"
+
+#include <sys/param.h>
+#include <sys/conf.h>
+#include <sys/kernel.h>
+#include <sys/systm.h>
+#include <sys/imgact.h>
+#include <sys/bio.h>
+#include <sys/buf.h>
+#include <sys/bus.h>
+#include <sys/cpu.h>
+#include <sys/cons.h>
+#include <sys/exec.h>
+#include <sys/ucontext.h>
+#include <sys/proc.h>
+#include <sys/kdb.h>
+#include <sys/ptrace.h>
+#include <sys/reboot.h>
+#include <sys/signalvar.h>
+#include <sys/sysent.h>
+#include <sys/sysproto.h>
+#include <sys/user.h>
+
+#include <vm/vm.h>
+#include <vm/vm_object.h>
+#include <vm/vm_page.h>
+#include <vm/vm_pager.h>
+
+#include <machine/clock.h>
+#include <machine/cpu.h>
+#include <machine/cpuregs.h>
+#include <machine/hwfunc.h>
+#include <machine/md_var.h>
+#include <machine/pmap.h>
+#include <machine/trap.h>
+
+extern int     *edata;
+extern int     *end;
+
+void
+platform_cpu_init()
+{
+       /* Nothing special */
+}
+
+static void
+mips_init(void)
+{
+       int i;
+
+       for (i = 0; i < 10; i++) {
+               phys_avail[i] = 0;
+       }
+
+       /* phys_avail regions are in bytes */
+       phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
+       phys_avail[1] = ctob(realmem);
+
+       dump_avail[0] = phys_avail[0];
+       dump_avail[1] = phys_avail[1];
+
+       physmem = realmem;
+
+       init_param1();
+       init_param2(physmem);
+       mips_cpu_init();
+       pmap_bootstrap();
+       mips_proc0_init();
+       mutex_init();
+       kdb_init();
+#ifdef KDB
+       if (boothowto & RB_KDB)
+               kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
+#endif
+}
+
+/*
+ * Perform a board-level soft-reset.
+ *
+ * XXXRW: BERI doesn't yet have a board-level soft-reset.
+ */
+void
+platform_reset(void)
+{
+
+       panic("%s: not yet", __func__);
+}
+
+void
+platform_start(__register_t a0, __register_t a1,  __register_t a2, 
+    __register_t a3)
+{
+       vm_offset_t kernend;
+       uint64_t platform_counter_freq;
+       int argc = a0;
+       char **argv = (char **)a1;
+       char **envp = (char **)a2;
+       unsigned int memsize = a3;
+       int i;
+
+       /* clear the BSS and SBSS segments */
+       kernend = (vm_offset_t)&end;
+       memset(&edata, 0, kernend - (vm_offset_t)(&edata));
+
+       mips_postboot_fixup();
+
+       mips_pcpu0_init();
+
+       /*
+        * XXXRW: We have no way to compare wallclock time to cycle rate on
+        * BERI, so for now assume we run at the MALTA default (100MHz).
+        */
+       platform_counter_freq = MIPS_DEFAULT_HZ;
+       mips_timer_early_init(platform_counter_freq);
+
+       cninit();
+       printf("entry: platform_start()\n");
+
+       bootverbose = 1;
+       if (bootverbose) {
+               printf("cmd line: ");
+               for (i = 0; i < argc; i++)
+                       printf("%s ", argv[i]);
+               printf("\n");
+
+               printf("envp:\n");
+               for (i = 0; envp[i]; i += 2)
+                       printf("\t%s = %s\n", envp[i], envp[i+1]);
+
+               printf("memsize = %08x\n", memsize);
+       }
+
+       realmem = btoc(memsize);
+       mips_init();
+
+       mips_timer_init_params(platform_counter_freq, 0);
+}

Added: head/sys/mips/beri/files.beri
==============================================================================
--- /dev/null   00:00:00 1970   (empty, because file is newly added)
+++ head/sys/mips/beri/files.beri       Sat Aug 25 08:31:21 2012        
(r239671)
@@ -0,0 +1,4 @@
+# $FreeBSD$
+mips/beri/beri_machdep.c               standard
+mips/mips/intr_machdep.c               standard
+mips/mips/tick.c                       standard

Added: head/sys/mips/beri/std.beri
==============================================================================
--- /dev/null   00:00:00 1970   (empty, because file is newly added)
+++ head/sys/mips/beri/std.beri Sat Aug 25 08:31:21 2012        (r239671)
@@ -0,0 +1,4 @@
+# $FreeBSD$
+files  "../beri/files.beri"
+
+cpu            CPU_MIPS4KC

Modified: head/sys/mips/mips/machdep.c
==============================================================================
--- head/sys/mips/mips/machdep.c        Sat Aug 25 08:09:37 2012        
(r239670)
+++ head/sys/mips/mips/machdep.c        Sat Aug 25 08:31:21 2012        
(r239671)
@@ -346,7 +346,12 @@ mips_vector_init(void)
        bcopy(MipsTLBMiss, (void *)MIPS_UTLB_MISS_EXC_VEC,
              MipsTLBMissEnd - MipsTLBMiss);
 
-#if defined(__mips_n64) || defined(CPU_RMI) || defined(CPU_NLM)
+       /*
+        * XXXRW: Why don't we install the XTLB handler for all 64-bit
+        * architectures?
+        */
+#if defined(__mips_n64) || defined(CPU_RMI) || defined(CPU_NLM) || defined 
(CPU_BERI)
+/* Fake, but sufficient, for the 32-bit with 64-bit hardware addresses  */
        bcopy(MipsTLBMiss, (void *)MIPS_XTLB_MISS_EXC_VEC,
              MipsTLBMissEnd - MipsTLBMiss);
 #endif
_______________________________________________
svn-src-all@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"

Reply via email to