Replying to random ath commit.
Now my ath wireless device does not work. It was broken some time after 8 Jun
(after my last update at 8 Jun it worked, now after today's update to r251945
it does not).
It spams log and console with messages:
Jun 19 10:04:27 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4)
Jun 19 10:04:58 gpr last message repeated 101 times
Jun 19 10:05:42 gpr last message repeated 143 times
Jun 19 10:05:42 gpr kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
Jun 19 10:05:42 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4)
Jun 19 10:05:47 gpr last message repeated 11 times
Jun 19 10:05:47 gpr kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
Jun 19 10:05:47 gpr kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
Jun 19 10:05:47 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4)
Jun 19 10:05:53 gpr last message repeated 19 times
...
Jun 19 10:06:20 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4)
Jun 19 10:06:21 gpr last message repeated 4 times
Jun 19 10:06:22 gpr kernel: ath0: ath_tx_should_swq_frame: f0:4f:7c:fc:b3:22:
Node is asleep; sending mgmt (type=0, subtype=176)
Jun 19 10:06:22 gpr kernel: ath0: ath_tx_should_swq_frame: f0:4f:7c:fc:b3:22:
Node is asleep; sending mgmt (type=0, subtype=176)
Jun 19 10:06:22 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4)
Jun 19 10:06:23 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4)
Jun 19 10:06:23 gpr kernel: ath0: ath_tx_node_wakeup: an=0xffffff8002322000:
node was already awake
Jun 19 10:06:24 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4)
Jun 19 10:06:25 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4)
# uname -a
FreeBSD gpr.nnz-home.ru 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r251945+1330981:
Wed Jun 19 08:09:32 MSK 2013
g...@gpr.nnz-home.ru:/usr/obj/usr/src/freebsd-head/sys/GPR amd64
Boot log device info:
Jun 19 10:04:18 gpr kernel: ath0: <Atheros 5212> mem 0xfbdf0000-0xfbdfffff irq
19 at device 10.0 on pci0
Jun 19 10:04:18 gpr kernel: ath0: AR2413 mac 7.9 RF2413 phy 4.5
Jun 19 10:04:18 gpr kernel: ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0056
# pciconf -lv
ath0@pci0:0:10:0: class=0x020000 card=0x2051168c chip=0x0013168c rev=0x01
hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'AR5212/AR5213 Wireless Network Adapter'
class = network
subclass = ethernet
# rc.conf
wlans_ath0="wlan0"
create_args_wlan0="wlandev ath0 wlanmode hostap"
ifconfig_wlan0="10.X.X.X/24"
hostapd_enable="YES"
I can do additional tests or submit more info, if necessary.
On Fri, Jun 14, 2013 at 08:15:28AM +0000, Adrian Chadd wrote:
> Author: adrian
> Date: Fri Jun 14 08:15:28 2013
> New Revision: 251741
> URL: http://svnweb.freebsd.org/changeset/base/251741
>
> Log:
> The AR9300 HAL uses this config to program AR_PHY_SWITCH_COM_2 on AR9485
> NICs which have bluetooth coexistence enabled.
>
> The WB225 NIC has the common antenna switch configuration set to 0x0 which
> disables all external switch bit setting. This obviously won't work when
> doing coexistence.
>
> This value is a magic value from the windows .inf files. It _looks_ right
> but I haven't yet verified it - unfortunately my AR9285+AR3012 BT combo
> has an earlier BT device which doesn't actually _have_ firmware on it.
> So I have to fix ath3kfw to handle loading in firmware into the newer
> NICs before I can finish testing this.
>
> This may not hold true for CUS198, which is another custom AR9485 board.
>
> Modified:
> head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c
>
> Modified: head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c
> ==============================================================================
> --- head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c Fri Jun 14
> 08:13:21 2013 (r251740)
> +++ head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c Fri Jun 14
> 08:15:28 2013 (r251741)
> @@ -249,6 +249,9 @@ ar9300_attach_freebsd_ops(struct ath_hal
> /* LNA diversity functions */
> ah->ah_divLnaConfGet = ar9300_ant_div_comb_get_config;
> ah->ah_divLnaConfSet = ar9300_ant_div_comb_set_config;
> +
> + /* Setup HAL configuration defaults */
> + ah->ah_config.ath_hal_ant_ctrl_comm2g_switch_enable = 0x000bbb88;
> }
>
> HAL_BOOL
> _______________________________________________
> svn-src-h...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/svn-src-head
> To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
>
_______________________________________________
svn-src-all@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
